´

D-Link DGL-4500 User Manual

Section ± - Product Overview

Hardware Overview

LEDs

OLED.Screen

Displays information

regarding the router

(see next page).

WPS.LED.

(side of unit)

A solid light indicates a

successful WPS connection.

A blinking light indicates the

device is trying to establish a

connection.

Power.LED

A solid light indicates a

proper connection to the

power supply.

µ

D-Link DGL-4500 User Manual

Section ± - Product Overview

Hardware Overview

OLED Screen

OLED Screen

2

3

4

6

5

1

1

WAN

Displays Internet connectivity.

2

Menu

Select to display the OLED main menu.

3

Performance

Select to display the data of the LAN, WAN,

and wireless connections.

4

WPS

Displays the WPS status.

5

Date/Time

Displays the routers date and time.

6

Status

Displays the device status.

¶

D-Link DGL-4500 User Manual

Section ² - Installation

Before you Begin

This section will walk you through the installation process. Placement of the router is very important. Do not place the

router in an enclosed area such as a closet, cabinet, or in the attic or garage.

• Please configure the router with the computer that was last connected directly to your modem.

• You can only use the Ethernet port on your modem. If you were using the USB connection before using

the router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable

to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call

your ISP to change connection types (USB to Ethernet).

•

If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software

such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to

the Internet.

• When running the Setup Wizard from the D-Link CD, make sure the computer you are running the CD

from is connected to the Internet and online or the wizard will not work. If you have disconnected any

hardware, re-connect your computer back to the modem and make sure you are online.

Installation

·

D-Link DGL-4500 User Manual

Section ² - Installation

Wireless Installation Considerations

The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within

the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls,

ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending

on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing

wireless range is to follow these basic guidelines:

1

. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum

- each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices

so that the number of walls or ceilings is minimized.

2

. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a

45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet

(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead

of at an angle) for better reception.

3

. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on

range. Try to position access points, wireless routers, and computers so that the signal passes through

drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water

(fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.

4

. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that

generate RF noise.

5

. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and

home security systems), your wireless connection may degrade dramatically or drop completely. Make

sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits

a signal even if the phone in not in use.

±0

D-Link DGL-4500 User Manual

Section ² - Installation

Network Diagram