±´

D-Link DCS-5±±0 User Manual

Section ² - Configuration

After you click on the DCS-5220-120 icon, your

Internet browser will automatically be opened to

the IP Address of the DCS-5220, in this example

it is: http://192.168.0.120. Your DCS-5220 may

have a different IP Address.

±µ

D-Link DCS-5±±0 User Manual

Section ² - Configuration

The window in the center of your browser is the camera image window. You should now see a video image and hear the

audio over your computer speakers from the DCS-5220. If you are having problems, please consult the Troubleshooting

section of this manual (page 135).

Open your Internet browser and type in the IP address of the DCS-5220. In this example, the address is: http://192.168.0.120

(your DCS-5220 may have a different IP address based on what you used in the Installation Wizard program).

Testing the DCS-5220

±¶

D-Link DCS-5±±0 User Manual

Section ² - Configuration

After all the router settings have been entered correctly, a PC user inside or outside your network will have access to

the camera through the Internet Explorer Web browser. To access the camera from the Internet, type the IP Address

of the router given to you by your ISP, followed by a colon, and the port number that you gave your camera (e.g.,

http://70.42.15.9:83). It is not necessary to enter the colon and port number if you are using the default Web server

port 80. To access from a computer on your local (home) network, simply enter the local IP Address of the Camera

followed by a colon and the port number (e.g., 192.168.0.120:83).

Viewing Your DCS-5220

If you are following this manual in the order it is presented,

you should now have an operating DCS-5220 Internet

Camera configured with the Installer program. This

section of the manual will cover how to use the Internet

Camera in two methods:

• Using the DCS-5220 with an Internet browser and

accessing the screens to control and monitor the

camera.

• Using IP surveillance software with the DCS-5220.

±·

D-Link DCS-5±±0 User Manual

Section ² - Configuration

Open your Internet Explorer Web browser and enter the IP address for your Internet Camera (http://192.168.0.120).

In the example, this address is 192.168.0.120. Your address may differ.

If a window appears asking to install a Verisign certificate for authentication Click Yes. This allows the proprietary

MPEG4 video stream to be recognized by Internet Explorer.

Using the DCS-5220 with an Internet Browser

²0

D-Link DCS-5±±0 User Manual

Section ² - Configuration

Click on the Snapshot button to capture a snapshot

image. The image will pop up in a new window. This

image can be saved into the local hard drive.

Click on the Connection Type button to change settings

related to the camera connection.

Click on the Configuration button to access the

configuration menu where you can configure the camera

settings under the Advanced, Tools, and Status tabs.

Click the Zoom button below the image to display the

digital zoom control panel. Using the bar, you can select

to view the image up to 400% of the original size.

The image from the DCS-5220 should be visible from the Home page on your computer monitor.

Home Page Screen

Snapshot:

Connection Type:

Configuration:

Zoom: