1´

D-Link DCS-5±±0 User Manual

Section ² - Configuration

Installation Wizard

The following options are available on the Installation Wizard

screen by clicking on the corresponding tab:

Configuration

This section will show you how to configure your new D-Link Wireless PT Internet Camera using the D-Link Installation

Wizard.

Click

Setup

1µ

D-Link DCS-5±±0 User Manual

Section ² - Configuration

On the initial Setup Screen you can configure System

and Date/Time settings for each camera. Click Next to

configure Network settings for the camera.

Click

Next

Setup

1¶

D-Link DCS-5±±0 User Manual

Section ² - Configuration

Users can configure the Network Settings for the camera

by entering the IP address, Subnet mask, Default router IP,

Primary DNS, and Secondary DNS. The option to reset IP

address at boot is automatically selected. If you would like

to keep your IP address settings, make sure to uncheck this

box.

Note:

These settings can also be configured on the

Advanced > Network

page when configuring the camera

via a Web Browser.

Click

Next

Network Settings

1·

D-Link DCS-5±±0 User Manual

Section ² - Configuration

Users can configure the Wireless Network Settings for

the camera, by entering the SSID and selecting the

Wireless Mode, Channel, TX Rate, and Preamble.

Note:

Check the Data Encryption box to enable data

encryption and configure the settings.

These settings are

explained and can also be configured on the

Advanced >

Network

screen (page 32) when configuring the camera

via a Web Browser.

Click

Next

Wireless Network Settings

±0

D-Link DCS-5±±0 User Manual

Section ² - Configuration

Click

Apply

to save the configured settings. Users can click

Previous to modify changes.

Click

Apply

Click

Done