Page 21 / 153
Scroll up to view Page 16 - 20
±1
D-Link DCS-5±±0 User Manual
Section ² - Configuration
The upgrade window allows users to upload the
firmware. If the firmware is older than the current one
on the camera, a message will appear indicating this,
prompting the user to confirm the uploading.
Upgrade
Page 22 / 153
±±
D-Link DCS-5±±0 User Manual
Section ² - Configuration
UPnP (Universal Plug and Play) is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. The
DCS-5220 is an UPnP enabled Internet camera. If your operating system is UPnP
enabled, the device will be easier to configure. If you do not want to use the UPnP
functionality, it can be disabled by unchecking the
Enabled UPnP
checkbox in
the
Advanced > Network
page (see page 32). Use the following steps to enable
UPnP settings only if you are running Windows
®
XP. If you are running Windows
®
98/2000, UPnP is not available.
Go to
Start > Settings
. Click Control Panel.
Enabling UPnP for Windows
®
XP
Click
Add or Remove Programs
Page 23 / 153
±²
D-Link DCS-5±±0 User Manual
Section ² - Configuration
The following screen will appear.
Select Networking Services.
Select Universal Plug and Play.
Click
Details
Click
Add/Remove Windows Components
Click
OK
Page 24 / 153
±³
D-Link DCS-5±±0 User Manual
Section ² - Configuration
Please wait while Setup configures the components.
Click
Next
Click
Finish
Page 25 / 153
±5
D-Link DCS-5±±0 User Manual
Section ² - Configuration
To view your DCS-5220 Internet Camera in an Internet browser, go
to your Desktop and click My Network Places.
Click DCS-5220 (192.168.0.120).
19216811.live