D-Link DCS-3220G Router Manual PDF (Setup & Configuration Guide)

Page 76 / 141 Scroll up to view Page 71 - 75

76

Using IP surveillance Software (continued)

Insert

– To insert a remote network camera

to the camera list. Click the “Insert”

button, an “Insert New Channel” dialog will popup, as shown below. Specify the

IP address, port, and admin password of the network camera, click the “Ok”

button to close the dialog. Then the system will try to connect to the selected

camera. If the connection succeeds, the camera will be inserted to the camera

selection list.

Click

Ok

.

Specify the IP address,

port, and admin pass-

word of the camera.

Once added, you will see the IP address of the camera and also the port that is

opened on the camera (port 80 in this example).

The selected camera

has been added to the

selection list.

Monitor Program (continued)

Page 77 / 141

77

Delete

– The deletion of a device is a much easier operation than “insertion”. It

removes the selected network camera from the camera list. Highlight the

camera that you want to delete from the list and click

on the “Delete” button.

Using IP surveillance Software (continued)

The selected camera

will be deleted.

History

– Clicking the “History” button will popup a historical camera list, which

lists the latest 16 cameras you inserted into the camera list. 16 is the default

number; you can change the number of the latest installed cameras you want

to keep in the registry. Clicking on one camera in the history list will insert the

camera into the camera list. The historical camera list is shown below.

Historical

camera list

Alert and Recording Settings

Alert Settings

Recording

Settings

Monitor Program (continued)

Page 78 / 141

78

Using IP surveillance Software (continued)

Alert Settings:

Specific alert actions can be performed by setting the options in this window.

±

Digital input alert

This application software provides options for you to define the

triggering criteria for the digital input of the

DCS-3220

. The alert

of the digital input can be defined as high-level triggered or low-

level triggered.

±

Recording Settings:

±

Monitor Program (continued)

Enable motion detect

This will trigger an alert sound that has been specified in the

section titled “Global Settings \ Alert Sound.” Check this option to

enable audio alert for the camera selected.

Enable digital input

This function is similar to “Enable Motion Detect” mentioned

above. Once this option has been checked, a digital input device

will be able to trigger an alert sound and recording.

Record # secs. before event

Once the automatic video recording has been activated, you can

change this setting to regulate the recording of triggered events.

Recording will start from the specified number of seconds before

the alert event has been invoked.

Record # secs. after event

Recording will last for the specified number of seconds after the

alert event has been invoked.

Media Type

You can specify which media type you want to record: Video,

Audio, or both.

Page 79 / 141

79

Changing the Camera Order in the List

Using IP surveillance Software (continued)

You can “drag and drop” in the grid area of the camera list to change the

sequence of the connected Network Cameras, which is shown below. This will

allow you to rearrange the cameras in an order of your choice. Once the camera

is moved to a specified location, the proceeding cameras will then move 1

position up or 1 position down depending on which direction the selected camera

was moved.

Step 1:

Step 2:

Press the left mouse button

at the gray index field.

Move the mouse to your new

selected location and release

the mouse button. Then Video

1 will be moved (to the 12th

row in this example).

Once you click the “Save” button in the left-bottom corner of this window, the

changes for all camera configurations will be saved and will be applied

immediately to the IP surveillance.

Monitor Program (continued)

Page 80 / 141

80

Using IP surveillance Software (continued)

Global Settings

After completing the connection to each remote Network Camera, we need to

configure some global settings for all the cameras. These include the video

database directory, the usage of the Hard disk, and options for video display.

You can activate the global settings window from “Configuration Menu > Global

Settings...” shown above.

All recording processes will be stopped

when activating the global settings

window, indicated by a warning window popped up in advance to keep you

informed.

Monitor Program (continued)

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share