D-Link DCS-3220G Router Manual PDF (Setup & Configuration Guide)

Page 61 / 141 Scroll up to view Page 56 - 60

61

Record Snapshots to your FTP server with

Motion Detection (continued)

1st FTP password-

Specify the password to access the external FTP

server (e.g. 12345).

1st FTP remote folder-

Specify the destination folder in the external FTP

server (e.g. snapshot).

Primary FTP passive

mode-

Passive mode will allow access to an external

FTP server if your camera is behind a router

protected by a firewall.

2nd FTP server-

Specify the Domain name or IP address of your

second external FTP server. This field is optional

if you have already filled in the information for the

first FTP server.

2nd FTP user name-

Specify the user name to access your backup

FTP server.

2nd FTP password-

Specify the user password to your backup FTP

server.

2nd FTP remote folder-

Specify the destination folder on your external

backup FTP server.

For detailed information about each setting, please refer to

Configuration >

Advanced > Network

in the section titled “Using the DCS-3220 With an Internet

Browser” (page 37). Click the apply button when finished.

Secondary FTP passive

mode-

Passive mode will allow access to a second

external FTP server if your camera is behind a

router protected by a firewall.

1st FTP user name-

Specify the user name to access the external FTP

server (e.g. John Smith).

4

5

6

7

1st FTP server port-

The port of the FTP server. The default is 21 for

an external FTP site.

3

2nd FTP server port-

The port of the FTP server. The default is 21 for

an external FTP site.

Page 62 / 141

62

Next, click the

Applications

button under the

Tools

tab to set the application

settings for the

DCS-3220

.

In this window, follow the steps below to set the application settings for

snapshots to be recorded to an FTP site:

c

Select the weekdays you would like to record and enter the

“Snapshots begin” time and “Snapshots end” time for the weekly

schedule, or select “All the time except for the above schedule” if you

want to enable full time snapshot recording.

d

Check “Event operation.”

e

Set the delay “before detecting next event” to avoid continuous false

alarms following the original event.

f

Set the “Snapshot interval” to capture the direction of the moving

object.

5

Check the window name (in this case Back Door).

6

Check “Upload snapshots while motion detected.”

7

Click “Send snapshots by FTP” and check “FTP put snapshots with

date and time suffix”

8

Click the “Apply” button to save the settings.

Click

Applications

.

Click the apply button when finished. You are now able to record snapshots to

your FTP server when motion detection is triggered.

Record Snapshots to your FTP server with

Motion Detection (continued)

X

Back Door

Page 63 / 141

63

Using IP surveillance Software

Installing the IP surveillance Software

Before you begin installing this application software, the hardware system

requirements must be checked first. The system minimum requirements

recommended for this application are as follows:

Hardware System Requirements

Software Installation

Put the installation disk into your CD-ROM, and it will run automatically. If it

does not, open “My Computer” and double click on the CD-ROM icon. Next the

installation menu will appear. Click “Install Software.” The following window will

appear.

Browser: Internet Explorer 5.x or above

CPU: Intel Pentium 4 1.7GHz or above

(Pentium 4, 2.8GHz plus processor with 512MB memory and a 32MB video

card is required for multiple camera viewing and recording in IP Surveillance)

SDRAM: 128 MB SDRAM

Hard Disk: 40GB

Video Card: nVidia, TNT, TNT2, GeForce series with 32MB video memory / ATI

Radeon series with 32 MB video memory

Click

IP surveillance

.

Page 64 / 141

64

Using IP surveillance Software (continued)

The “License Agreement” window below will appear. Please read the following

license agreement carefully. Click “Yes” to accept this agreement and proceed

with the installation.

Click

Yes

Installing the IP surveillance software (continued)

Page 65 / 141

65

Using IP surveillance Software (continued)

Next, the “User information” window below will appear. This window will prompt

you to enter the user name and company name. Enter your user name and

company name and then click “Next” to continue.

Click

You must setup the administrator’s password in order to proceed. Input and

confirm your password in the window shown in below. Click “Next” to continue.

Click

Installing the IP surveillance software (continued)

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share