D-Link DCS-3220 Router Manual PDF (Setup & Configuration Guide)

Page 46 / 141 Scroll up to view Page 41 - 45

46

Recording settings for clear identification for each image

To have the best video quality, you should set

Fix quality

to

detailed

or

excellent

and tune the

Maximum frame rate

to suit your network bandwidth. Note that

any slow connection with multiple users will impair performance.

Recommendations for setting video for the best

performance (continued):

Recording settings to compromise between real-time and clear

images

If you have a broadband network, set

Fix quality

to

Good,

or better, rather than

setting the

Bit rate

. Otherwise fix the bandwidth to accomodate your actual

network speed and set the frame rate to 30. If the images quality is low, select

the lower frame rate above 15.

Using the DCS-3220 with an Internet browser

(continued)

Configuration > Advanced > Audio

Click

Audio

.

Page 47 / 141

47

Configuration > Advanced > Audio (continued)

Using the DCS-3220 with an Internet browser

(continued)

Configuration > Advanced > Image Setting

Improve audio quality

in low bandwidth

environment

-

The camera will detect and adjust the frame rate

according to the user’s network throughput. If the

camera works in a versatile or low network

bandwidth environment, the user can select this to

improve audio by sacrificing some real-time

synchronization between audio and video.

Transmission Mode

-

Select the transmission mode that the camera will

use to transmit audio. You can select: Talk and Listen

Simultaneously; Talk or Listen, not at the same time;

Talk Only; Listen Only; or Disable. Selecting Talk

and Listen Simultaneously will require use of more

bandwidth while Talk Only or Listen Only will use

less bandwidth to transmit audio.

Click

Image Setting

.

Page 48 / 141

48

Click

Motion Detection

.

Configuration > Advanced > Motion Detection

Click the

Motion Detection

button from the

Configuration

screen to access

settings that effect how the

DCS-3220

Internet Camera can serve as a security

device by recording only when motion is detected.

Using the DCS-3220 with an Internet browser

(continued)

You may press

to fine-tune the image and see what effect the setting will

have on the image. When the image is acceptable, press

to store the

image settings, or

to recall the original settings.

Configuration > Advanced > Image Setting (continued)

Click the image setting button from the configuration screen to access additional

settings that affect how the video image appears.

Image

Brightness

,

Contrast

,

Saturation

, and

Hue

are all adjusted in the same

manner. For each video compensation you can set from among eleven levels

ranged from -5 to

+5.

From this screen you can fine tune the video image.

Page 49 / 141

49

Configuration > Advanced >Motion Detection (continued)

New -

Click to add a new window. A maximum of three

motion windows can be opened simultaneously.

Use your mouse to drag the window frame to

resize or the title bar to move. Clicking on the ‘x’

at the upper right corner of the window will close

the window.

Save -

Saves the related settings of that window.

Using the DCS-3220 with an Internet browser

(continued)

A green bar means the image variation is under the monitoring level, and no

motion detection alert is triggered. A red bar means the image variation is over

the monitoring level and a motion detected alert is triggered.

When the bar

goes red, the window that the motion is detected in will also be outlined in red

(note: remember that you can have up to 3 windows selected for motion

detection). You can return to the

DCS-3220

Home Page and the monitored

window will not be visible, but the red frame will show on the home page when

motion is detected.

Enable motion detection

-

Check this option to turn on the motion detection.

Window Name

-

The text entered here will show at the top of the

motion window.

Sensitivity -

Sets the measurable difference between two

sequential images that would indicate motion.

Percentage -

Sets the amount of motion in the window being

monitored that is required to initiate a motion

detected alert. If this is set to 100%, this means

that motion is detected within the whole window

to trigger a snapshot.

Note:

Setting a higher

sensitivity

and a lower

percentage

will make any motion more easily

detected.

To display motion detection, a graphic bar will rise or fall depending on the

image variation.

Page 50 / 141

50

Configuration > Tools > Admin

Click on the

Tools

tab to access 4 utility screens for controlling and administering

the

DCS-3220

. The default screen in

Tools

is the

Admin

screen.

The

DCS-3220

is manufactured without any passwords by default. This

allows

the ability to access the

DCS-3220

(including the Configuration) by

anyone as long as the IP address is known. It is recommended that you enter

a password to restrict others from accessing your camera.

Type a password in the

New Password

field to enable protection, and then

confirm the password in

Confirm Password

field.

This password is used to identify the administrator. You can add accounts with

User name

and

User Password

for other users in the

Add user

section.

Using the DCS-3220 with an Internet browser

(continued)

You can provide up to twenty accounts for other users / visitors. Each account

identifies the access right. This allows multiple visitors to share the same account

of different levels. An option to

I/O Access

(Digital In/Digital Out) is provided for

each account. Some users may need to be prohibited from controlling your

attached security devices. You also have the option to set

Talk

and

Listen

permissions for each user by clicking the corresponding check box.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share