1µ

D-Link DCS-±1±0 User Manual

Section ² - Configuration

After you click on the DCS-2120 icon, your Internet

browser will automatically be opened to the IP Address of

the DCS-2120, in this example it is: http://192.168.0.120.

Your DCS-2120 may have a different IP Address.

1¶

D-Link DCS-±1±0 User Manual

Section ² - Configuration

The window in the center of your browser is the camera image window. You should now see a video image and hear the

audio over your computer speakers from the DCS-2120. If you are having problems, please consult the Troubleshooting

section of this manual (page 128).

Open your Internet browser and type in the IP address of the DCS-2120. In this example, the address is: http://192.168.0.120

(your DCS-2120 may have a different IP address based on what you used in the DCC program).

Testing the DCS-2120

1·

D-Link DCS-±1±0 User Manual

Section ² - Configuration

After all the router settings have been entered correctly, a PC user inside or outside your network will have access to

the camera through the Internet Explorer Web browser. To access the camera from the Internet, type the IP Address

of the router given to you by your ISP, followed by a colon, and the port number that you gave your camera (e.g.,

http://70.42.15.9:83). It is not necessary to enter the colon and port number if you are using the default Web server

port 80. To access from a computer on your local (home) network, simply enter the local IP Address of the Camera

followed by a colon and the port number (e.g., 192.168.0.120:83).

Viewing Your DCS-2120

If you are following this manual in the order it is presented,

you should now have an operating DCS-2120 Network camera

configured with the Installer program. This section of the manual

will cover how to use the Network camera in two methods:

• Using the DCS-2120 with an Internet browser and accessing

the screens to control and monitor the camera.

• Using IP surveillance software with the DCS-2120.

1¸

D-Link DCS-±1±0 User Manual

Section ² - Configuration

Open your Internet Explorer Web browser and enter the IP address for your Network camera (http://192.168.0.120).

In the example, this address is 192.168.0.120. Your address may differ.

If a window appears asking to install a Verisign certificate for authentication click Yes. This allows the proprietary

MPEG4 video stream to be recognized by Internet Explorer.

Using the DCS-2120 with an Internet Browser

±0

D-Link DCS-±1±0 User Manual

Section ² - Configuration

Click on the Snapshot button to capture a snapshot

image. The image will pop up in a new window. This

image can be saved to your local hard drive.

Click on the Client Setup button to change settings

related to the camera connection.

Click on the Logout button to logout from the camera

server and close the browser.

The image from the DCS-2120 should be visible from the device’s Home page on your web browser.

Home Page Screen

Snapshot:

Client Setup:

Logout: