11

D-Link DCS-±1±0 User Manual

Section ² - Configuration

D-Link Click’n Conenct (DCC)

DCC will show the MAC address and IP address of your DCS-2120. If you have a DHCP* server on your network,

there will be a valid IP Address displayed at the end of DCC process. You can begin to use the IP camera

now.

*A DHCP server is a device that supplies IP Addresses to its

clients that are on the same network.

Configuration

Turn on the computer and Insert the D-Link DCS-2120 Driver CD in the CD-ROM drive. The step-by-step instructions

will help you to search and setup your IP camera smoothly and quickly.

If the CD Autorun function does not automatically start on your computer, click Windows

®

Start > Run. In the Run

command box type “D:\DCS5220.exe”, where D: represents the drive letter of your CD-ROM. If it does start, proceed

to the next screen.

Click

Start

1±

D-Link DCS-±1±0 User Manual

Section ² - Configuration

UPnP (Universal Plug and Play) is a networking architecture that provides

compatibility among networking equipment, software, and peripherals. The

DCS-2120 is an UPnP enabled Network camera. If your operating system is

UPnP enabled, the device will be easier to configure. If you do not want to use

the UPnP functionality, it can be disabled by unchecking the

Enabled UPnP

checkbox in the

Advanced > Network

page (see page 32). Use the following

steps to enable UPnP settings only if you are running Windows

®

XP. If you are

running Windows

®

98/2000, UPnP is not available.

Go to

Start > Settings

. Click Control Panel.

Enabling UPnP for Windows

®

XP

Click

Add or Remove Programs

1²

D-Link DCS-±1±0 User Manual

Section ² - Configuration

The following screen will appear.

Select Networking Services.

Select Universal Plug and Play.

Click

Details

Click

Add/Remove Windows Components

Click

OK

1³

D-Link DCS-±1±0 User Manual

Section ² - Configuration

Please wait while Setup configures the components.

Click

Next

Click

Finish

1´

D-Link DCS-±1±0 User Manual

Section ² - Configuration

To view your DCS-2120 Network camera in an Internet browser, go

to your Desktop and click My Network Places.

Click DCS-2120 (192.168.0.120).