µ

D-Link DCS-±1±0 User Manual

Section 1 - Product Overview

• 3G Compatibility: Offers customers the ability to view live video streams from a compatible 3G cell phone. The

live camera feed can be pulled from a 3G cellular network by using a compatible cell phone with a 3G video

player.

• Supports a Variety of Platforms: Supporting TCP/IP networking, SMTP e-mail, HTTP and other Internet related

protocols, the DCS-2120 Network camera can be integrated into other Internet/Intranet applications because

of its standards-based features.

• Remote Snapshot Images: You can save snapshots directly from the Web browser to a local hard drive

without installing any additional software, making it convenient to instantly capture any moment from a remote

location.

• Low Light Recording and 4x Digital Zoom: The DCS-2120’s 0.5 lux light sensitivity allows you to capture video

in rooms with minimal lighting, making it ideal for use at night time. The camera also features 4x digital zoom

for closer viewing.

• Web Configuration: Using the Internet Explorer Web browser, administrators can configure and manage the

Network camera directly from its own Web page via the Intranet or the Internet. Up to 20 user names and

passwords are permitted, with privilege settings controlled by the administrator.

• Powerful Surveillance and Remote Monitoring Utility: The powerful IP surveillance software allows an administrator

to modify the Network camera settings from a remote site via the Intranet or the Internet. Administrators are

capable of monitoring live video feeds as well as recording video and taking snapshots.

• Broad Range of Applications: With today’s high-speed Internet, the Network camera provides the ideal solution

for live video images over the Intranet and Internet for remote monitoring. The DCS-2120 allows remote access

from an Internet Explorer Web browser for live image viewing with audio and allows the administrator to manage

and control the Network camera anywhere and any time. Apply the Network camera to monitor various objects

and places such as homes, offices, banks, hospitals, child-care centers, amusement parks and other varieties of

industrial and public monitoring. The Network camera can also be used for intruder detection with its motion-detection

mode, capture still images and video images for archiving and many more applications. The wireless capability

enables you to place the camera where it is inconvenient to install network cables.

Features

¶

D-Link DCS-±1±0 User Manual

Section 1 - Product Overview

Hardware Overview

Antenna Connector

One antenna is included with the DCS-2120.

It is fastened onto the antenna connector on

the side panel to provide a connection with

a wireless network.

DC Power Connector

The DC Power input connector is labeled DC

5V with a single jack socket to supply power

to the DCS-2120.

Ethernet Cable Connector

The DCS-2120 features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX

Fast Ethernet cabling. The port supports the NWay protocol, allowing the DCS-2120 to automatically detect or

negotiate the transmission speed of the network.

Reset Button

Reset will be initiated when the reset button is pressed once and Power

LED begins to flash. Factory Reset will be initiated when the reset button

is pressed continuously for 30 seconds. Release the reset button and the

Power LED will begin to flash indicating that the DCS-2120’s settings are

restored back to the factory settings.

·

D-Link DCS-±1±0 User Manual

Section 1 - Product Overview

Power LED

The power LED is positioned in the center of

the camera below the Network camera Lens.

As soon as the power adapter is connected

to the camera, the power LED will flash red

and blue several times, indicating that the

DCS-2120 is conducting a self-test. Upon

passing the self-test, the LED will turn blue,

indicating a good connection to an Ethernet

or wireless connection. A red LED indicates

that no connection has been made.

LEDs

¸

D-Link DCS-±1±0 User Manual

Section 1 - Product Overview

Hardware Installation

Connect an Ethernet cable to the Ethernet connector located on the Network

camera’s bottom panel and attach it to the network.

Note:

It is required that an Ethernet cable is used during initial setup. Once your

wireless configuration is set, you may disconnect the Ethernet cable.

Attach the external power supply to the DC power input connector located on the

Network camera’s bottom panel (labeled 5VDC) and connect it to your wall outlet.

When you have a proper connection, the LED will light up.

The LED will flash red and blue when you first power on the unit. The LED will not

turn blue until the camera has received a network IP address.

10

D-Link DCS-±1±0 User Manual

Section ± - Installation

Wireless Installation Considerations

The D-Link wireless network camera lets you access your network using a wireless connection from virtually anywhere

within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of

walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary

depending on the types of materials and background RF (radio frequency) noise in your home or business. The key

to maximizing wireless range is to follow these basic guidelines:

1

. Keep the number of walls and ceilings between the D-Link adapter and other network devices to a

minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position

your devices so that the number of walls or ceilings is minimized.

2

. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a

45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet

(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead

of at an angle) for better reception.

3

. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on

range. Try to position access points, wireless routers, and computers so that the signal passes through

drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water

(fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.

4

. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that

generate RF noise.

5

. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and

home security systems), your wireless connection may degrade dramatically or drop completely. Make

sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits

a signal even if the phone in not in use.