D-Link DCS-2000 Router Manual PDF (Setup & Configuration Guide)

Page 101 / 140 Scroll up to view Page 96 - 100

101

Using IP surveillance Software (continued)

Scheduling (continued)

Digital Input

In the figure above, there are four conditions for the digital input. Check the

condition that you would like to record while the condition triggers.

±

Schedule modes

If you select Continuous mode in the schedule mode selector, it will record

continuously during the schedule that is set up by the user.

Secondary Schedule

Secondary schedule is for recording outside of the primary schedule. The

secondary schedule provides options to record without a specified date or time.

Schedule in Continuous mode

high

Checking this will trigger recording while the digital input is high.The

technical name for this event is line trigger.

low

Checking this will trigger recording while the digital input is low.

The technical name for this event is line trigger.

rising

Checking this will trigger recording while the digital input is

changing from low to high. The technical name for this event is

edge trigger.

falling

Checking this will trigger recording while the digital input is

changing from high to low. The technical name for this event is

edge trigger.

Page 102 / 140

102

Using IP surveillance Software (continued)

Scheduling (continued)

The Schedule Scheme operations

There are six related buttons. “Load…”, “Undo”, “Clear”, “Save”, “Save as…”

and “Close” for handling the schedule schemes. These operations are shown

in the figure below.

Undo

Click on this button to undo all changes for the current schedule

since the last save.

±

Close

Click on this button to close the scheduler.

±

Load...

This button allows you to load pre-edited schedules from the

scheduling directory for the selected video channel. Note that

you should save the schedule you are currently working on before

loading a new one. Otherwise, the current changes will be lost.

±

Clear

This button will clear all changes in the current schedule of the

selected video channel.

±

Save

This button is used for saving changes to the current schedule.

Save As...

This button is used to save the current schedule as another file

name instead of the default name.

±

There are three modes in the secondary schedule: Disable, Event mode, and

Continuous mode. If event mode is selected in the secondary schedule, the

camera will record whenever an event is triggered. If continuous mode is

selected, the camera will begin recording continuously after scheduling settings

are saved. These two modes are the same as the primary schedule. Please

refer to the previous section for more detail.

Page 103 / 140

103

Using IP surveillance Software (continued)

Playback Program

Powerful play control tool:

Play

Stop

Pause

Step forward

Fast play (from x1 to x16)

Slow play (from /1 to /16)

±

Convenient display adjustment tool:

Zoom in (from 1:1 to 2.25:1)

Zoom out (from 1:1 to 1:2)

Full screen

±

Flexible searching range adjustment tool:

User input (from full range to 1 second)

Zoom in (from full range to 10 seconds)

Zoom out (up to full range)

Full range

±

System control tool:

Window locker

System settings

±

Features of Playback

The playback program is a very powerful, convenient, and easy way to browse

the recorded video. It has one display mode (normal display mode) and two

playback methods (full range and time period). There are several main functions

including special features in the Playback program. These functions are

depicted as follows.

Page 104 / 140

104

Using IP surveillance Software (continued)

Logging In

Before you start the playback program, it is necessary for you to log in to the

application software. The figure below shows the login dialog. For security

concerns, only the admin account can log in to this program. To change the

password of the admin account, please refer to the section titled “Logging In.”

Layout

Display Area

Control

Area

Pull Bar

Area

Area Selection Indicator

Status Area

Histogram Area

Playback Program (continued)

Page 105 / 140

105

Using IP surveillance Software (continued)

Playback Program (continued)

When you successfully log in to the playback system, the main window will be

shown on the top of the screen and the display resolution will be changed to

1024x768 automatically (see page 104). There are four main areas, i.e. display

area, histogram area, control area, and status area. There are also three

visualized controls , i.e. area selection indicator, frame selection indicator, and

pull bar. These features provide much more convenience while searching

recorded video in the IP surveillance database.

Main Areas

Display Area

The display area is able to show the surveillance database of each camera by

time. You can change the video size through the display adjustment tool and the

playback method through the play control tool. Under the normal display mode

as shown in the figure below, you can just double click on the frame area to

change the frame size to 1:1 or 2.25:1.

Playback method

Display adjustment tool

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share