D-Link DCS-2000 Router Manual PDF (Setup & Configuration Guide)

Page 116 / 140 Scroll up to view Page 111 - 115

116

Zoom Out

Playback Program (continued)

Using IP surveillance Software (continued)

Lock Window

Each time you click on the “Zoom Out” button in the searching range adjustment

toolbox, the displayed time period will be double in the center of the original

time period unless the start time or end time exceeds the whole database time-

boundary. The scale of the pull bar and alert histogram window change. The

period start and end time change as well. The period selector will show the

new start and end time. And the display area will restart and display the new

period from the newly defined start time

.

When you click on the “Full Range” button, you will get the same functionality

as when you change the playback method selector to “Full Range.”

System Control Toolbox

The system control toolbox provides some basic operations for the playback

program. The figure below shows the three elements of the system control

toolbox, i.e. “Lock Window”, “Settings”, “Minimize”, and “Exit.”

Full Range

If you are away from your computer, for security reasons, we recommend that

you to close the playback program or you can just click on the “Lock Window”

button to lock the main window. Once you click this button, the main window

will be hidden and the login dialog will appear. To return to the main window, you

need to re-enter the admin’s password again.

Page 117 / 140

117

Settings

Playback Program (continued)

Using IP surveillance Software (continued)

The settings dialog will pop up when you click the “Settings” button. For more

information about setting this program, please refer to the section titled

"Settings.”

Minimize

Click this button in order to minimize the playback program window.

Exit

The playback program will be closed immediately when you click on the “Exit”

button.

Page 118 / 140

118

Schedule Video Recording with Motion

Detection

Next, run the

IP surveillance

program. Click on the

Configurations

button

and select

Scheduler

.

c

Check “Enable motion detection.”

d

Click on “New” to have a new window to monitor video.

e

Enter in a window name.

f

Adjust the “Sensitivity” and “Percentage” levels according to the local

environment. The highest sensitivity and lowest percentage provides

the most sensitive setting.

5

After adding the motion window, click on save to enable the

activity display. You can add up to 3 motion windows to trigger

recording.

To schedule video recording with motion detection, you must first enable motion

detection on the Internet Camera. Click the

Motion Detection

button under

the

Advanced

tab from the

Configuration

screen to access settings that affect

how the

DCS-2000

Internet Camera can serve as a security device by recording

only when motion is detected. Note: These settings can be configured in your

Web browser and while logged into the

IP surveillance

Program.

In this window, follow the steps below to ensure that motion detection is correctly

enabled:

For detailed information about each setting, please refer to

Configuration >

Advanced > Motion Detection

in the section titled “Using the DCS-2000 With

an Internet Browser” (page 47).

Click

Motion Detection

Page 119 / 140

119

Schedule Video Recording with Motion

Detection (continued)

In the

Primary Schedule

you can choose either

Once

(for one time recording)

or

Every Day

(for scheduled recording). For example, if you would like to record

events every day during a certain time frame, click on the beginning time and

drag your mouse to the ending time. Schedule recording can be configured by

minutes, hours, days, weeks, or months.

The

Secondary Schedule

allows you to set a schedule outside the

Primary

Schedule

. The

Secondary Schedule

provides two options to record without

a specified date or time. You can select

Event Mode

, which will record

whenever an event is triggered, or

Continuous Mode

, which will begin

continuously after scheduling settings are saved. You do not need to set the

Secondary Schedule

with the

Primary Schedule

. To schedule video recording

with motion detection, you can use either the

Primary Schedule

or

Secondary

Schedule

, or both.

Click

Scheduler

Page 120 / 140

120

f

Select the motion detection window that will be used to trigger motion

detection. Note: You must first create motion detection windows in the

Web configuration page of the camera. Remember the names of the

windows and the order in which you created them, as they are not

displayed inside the scheduler. Instead, they are listed in the order

they were added. For example, the first window created is labeled

“Window1.”

5

Click on “Disable” under the

Secondary Schedule

.

Click the

Save

button when finished. You have now set a schedule to record

video when motion detection is triggered. If you would like to save this

configuration, click

Save As

to save this configuration to a folder in your hard

drive. This configuration can be used on another system running IP surveillance

or can be used as a backup if you need to re-install the IP surveillance software

program.

Schedule Video Recording with Motion

Detection (continued)

c

Check if you want the recording schedule to occur

Once

or

Every

day

.

d

Set the date, time-line, and begin and end times for recording.

e

Check

Event Mode

.

In this window, follow the steps below to schedule video recording with motion

detection in the

Primary Schedule

:

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share