Page 86 / 140
Scroll up to view Page 81 - 85
86
Using IP surveillance Software (continued)
Video shown
Empty video box
Monitor Program (continued)
Removing video from a display window
Step 1:
Move the mouse cursor to the display window that contains the video
channel you wish to remove.
Step 2:
Note that the cursor will change to the hand-shape when it has been
moved onto the displaying frame. After that, press the left mouse button and
hold it.
Step 3:
Move the cursor, while still holding the left mouse button, to the trashcan
in the common area of the monitor program.
Step 4:
When the cursor shape changes to an arrow-shape over the trashcan,
release the left mouse button. The video in the corresponding display window
will disappear. All operations above are shown in the figure on the following
page.
Page 87 / 140
87
Using IP surveillance Software (continued)
Press and hold the left
mouse button here.
Move the mouse cursor
here, and then release
the left mouse button.
4 camera layout
9 camera layout
1 camera layout
6 camera layout
13 camera layout
16 camera layout
Monitor Program (continued)
The Layout
There are six different layouts available, as shown below, for the display
windows in the monitor program. You can select one of them by clicking on
a layout icon. In each layout, you can drag and drop the “channel number” to
any display window in the video area. Following the procedures described
in the section titled “Show the video of a specified channel”, you can add
the video channels to display windows within the selected layout one by
one. You can also exchange the video between different display windows
by dragging and dropping.
Page 88 / 140
88
Using IP surveillance Software (continued)
Double click on a dis-
play window to switch
to a single channel
layout.
When you choose the one-channel layout or four-channel layout, the “Page up”
and “Page down” buttons will be shown in the left-bottom corner of the video
area. You can use these two buttons to switch the pages, as shown in the
figure below.
Use to switch between
cameras.
PT
Monitor Program (continued)
Page 89 / 140
89
Using IP surveillance Software (continued)
Back
Back to previous
layout.
Input/Output Control Tools
PT
PT
Digital Input /
Digital Output
Alert Message
Monitor Program (continued)
To view an individual camera from the multi-camera layout, double-click on the
desired display window. You will see that the size of the display window is the
same as the one-channel layout. Clicking the “Back” button in the upper-left
corner of the video area will switch to the previous selected multi-camera layout.
The position that each video channel is in for every layout will be saved for the
next time the layout is selected.
Page 90 / 140
90
Using IP surveillance Software (continued)
IP surveillance includes DI/DO (Digital Input / Digital Output) control and an
alert message receiver. These features are described in detail below.
DI/DO Control
Clicking on the “DI/DO” button shown below, you can switch to the DI/DO
controls. The color of the channel number indicates the status of the DI (Digital
Input). You can click the “Switch button” to change the HI/LOW state of the DO
(Digital Output). With these features, you can monitor the remote sensor input
from DI and also trigger the camera by DO switch
.
Monitor Program (continued)
Set digital output to LOW
Set digital output to HIGH
No connection
PT
When the color of a DI/DO number is gray, that means the video has not yet
been connected to a camera.
19216811.live