1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DCS-1000
    5. /
  5. 6
Page 26 / 83 Scroll up to view Page 21 - 25
25
“Cancel”
icon to restore all settings to the values last saved to or retrieved
from DCS-1000.
Please refer to the appendix for detailed information regarding the I/O
Connector.
Warning
When connecting other devices through the I/O connectors, please make sure
the maximum current of 100mA is strictly observed.
Any failure to do so
might cause a loss of power to DCS-1000 and possibly cause serious damage
to the Network Camera.
Page 27 / 83
26
System Administration - Information
The Information menu contains commands for displaying information about
DCS-1000.
Click on
“Information”
in the system administration menu bar and the
Information screen will appear as illustrated below:
The Information table provides detailed information of DCS-1000 such as the
Model Name, Firmware Version, Mac Address, and IP Address.
System Administration - Tools
The Tools menu contains commands for restarting DCS-1000.
Click on
“Tools”
in the system administration menu bar and the Tools screen
will appear as illustrated below:
Reset:
The Reset command restarts DCS-1000 just like turning the device off and on
and saved settings are retained.
The Reset panel contains the message “Do
you really want to reset this device?” and a YES button.
If you do not want to
reset DCS-1000, exit the panel without clicking YES, otherwise, click on the
“YES”
icon and the reset process will initiate.
Click on
“Home”
to
return to Home Screen
Click on
“Home”
to
return to Home Screen
Page 28 / 83
27
Factory Reset:
A factory reset restarts DCS-1000 and returns all of its settings to their default
values.
The Factory Reset panel contains the message “Do you really want to
factory reset this device?” and a YES button.
If you do not want to carry out a
factory reset command, exit the panel without clicking YES, otherwise click
on the
“YES”
icon and factory reset will be initiated.
Note:
The Network must be reconfigured after a Factory Reset.
Once the configuration is completed click on
“Home”
to return to the Home
screen and select the desired Viewing Image either through ActiveX Mode or
Java Mode as described in the next section.
Then position DCS-1000 to the desired location appropriately for your
purpose.
Followed by adjustment of DCS-1000 focus, done manually by
turning the lens clockwise or anti-clockwise to the desire image quality.
Please refer to the appendix for detailed information regarding Adjusting
DCS-1000 Focus and Replacing the Lens.
View Image – ActiveX Mode
To view video images from the browser, click on
“View Image – ActiveX
Mode”
from the Home screen to access the video images from Internet
Explorer as illustrated below:
Click on
“Home”
to
return to Home Screen
Camera Name*
Location**
Page 29 / 83
28
Camera Name*
- The Camera name will be display when the Camera Name
field is entered in the Web Configuration setting under
“System”
Location**-
The location of DCS-1000W will be displayed when the
Location field is entered in the Web Configuration settings under
“System”
.
Note:
Please refer to the appendix on how to install ActiveX.
1.
Install to the Web Server
2.
Install to your Local PC
In the View Image – ActiveX Mode you are allowed two output trigger
options.
Just click on the desired selection
“ON”
or
“OFF”
to utilize the
options for each of the output triggers (Output 1 trigger or Output 2 trigger).
Note 1:
Output trigger will send a 5V signal to the device connected to the DCS-1000.
A maximum of two devices is permitted to connect to DCS-1000 to utilize the
output trigger function.
Please refer to appendix for detailed information.
Note 2:
Administrator has the authority to allow user’s the permission to set the output
trigger functions through the setting in the
“Users”
of System Administration
menu bar.
Page 30 / 83
29
View Image – Java Mode
Click on
“View Image – Java Mode”
from the Home screen to access the
video images from the Internet Explorer or Netscape browser as illustrated
below:
Camera Name*
- The Camera name will be display when the Camera Name
field is entered in the Web Configuration setting under
“System”
Location**
- The location of DCS-1000W will be displayed when the
Location field is entered in the Web Configuration settings under
“System”
.
In the View Image – Java Mode you are allowed two output triggers.
Just
click on the desired selection
“ON”
or
“OFF”
to utilize the options for each
of the output triggers (Output 1 trigger or Output 2 trigger).
Note 1:
Output trigger will send a 5V signal to the device connected to DCS-1000.
A
maximum of two devices is permitted to connect to DCS-1000 to utilize the
output trigger function.
Please refer to appendix for detailed information.
Note 2:
Administrator has the authority to allow user’s the permission to set the output
trigger functions through the setting in the
“Users”
of System Administration
menu bar.
Click on
“Home”
to
return to Home Screen
Camera Name*
Location**

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top