1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DCS-1000
    5. /
  5. 2
Page 6 / 83 Scroll up to view Page 1 - 5
5
Connection to External Devices
Supporting auxiliary Input/Output Connector, you can connect DCS-1000 to a
variety of external devices such as IR-sensors, switches and alarm relays.
One
can combine with programmable alarming facilities to develop a variety of
security applications that are triggered on alarm-based events.
DCS-1000
provides up to two in/out external devices for connectivity.
Broad Range of Applications
With today’s high-speed Internet services, DCS-1000 can provide the ideal
solution for live video images over the Intranet and Internet for remote
monitoring.
DCS-1000 allows remote access from a web browser for live
image viewing and allows administrator to manage can control DCS-1000
anywhere and any time in the world.
Apply DCS-1000 to monitor various
objects and places such as homes, offices, banks, hospitals, child-care centers,
amusement parks and other varieties of industrial and public monitoring.
DCS-1000 can also be used for intruder detection, capture still images and
video images for archiving and many more applications.
Physical Description
This section describes the externally visible features of DCS-1000.
Front Panel
Power LED
The Power LED is positioned on the right side of DCS-1000’s lens while
facing DCS-1000.Steady blue confirms DCS-1000 is powered on.
Note:
There are three settings for the Power LED to control the light illumination for
Power LED
LAN LED
Manual Focus Ring
Page 7 / 83
6
monitoring purpose from Normal / Off / Dummy.
Please refer to the Web
Configuration section for detailed information and usage.
LAN LED
The LAN LED is positioned on the far right side of the DCS-1000’s lens
while facing DCS-1000.
It is located right of the Power LED. Steady orange
confirms good connection to LAN connectivity.
Dependent on the data traffic the LED will begin to flash to indicate DCS-
1000 is receiving/transceiving from/to the LAN or network.
Note
:
There are three settings for the LAN LED to control the light illumination for
monitoring purpose from Normal / Off / Dummy. Please refer to the Web
Configuration section for detailed information and usage.
Rear Panel
Network Cable Connector
DCS-1000’s rear panel features an RJ-45 connector for connections to
10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which
should be Category 5 twisted-pair cable).
The port supports the NWay
protocol, allowing DCS-1000 to automatically detect or negotiate the
transmission speed of the network.
Network Cable
Connector
I/O Connector
DC Power
Connector
Reset Button
Page 8 / 83
7
DC Power Connector
The DC power input connector is located on DCS-1000’s rear panel and is
labeled
DC 5V
with a single jack socket to supply power to DCS-1000.
Reset Button
Reset will be initiated when the reset button is pressed once and Power LED
begins to flash.
Factory Reset will be initiated when the reset button is pressed continuously
for three seconds or when Power LED begins to light up.
Release the reset
button and the Power LED will begin to flash indicating DCS-1000 is
changing to factory reset.
When factory reset is completed the IP address will
return to the default setting as 192.168.0.20.
I/O Connector
There are four I/O connectors, two for input and two for output situated on the
rear panel.
The I/O connectors provide the physical interface to send and
receive digital signals to a variety of external alarm devices.
Please refer to
the User’s Guide appendix for detailed information
.
Bottom Panel
Screw Hole
Located on the bottom panel of DCS-1000 the screw hole is used to connect
the camera stand onto DCS-1000 by attaching the screw head on the camera
stand into the screw hole of DCS-1000.
Screw Hole
Page 9 / 83
8
Unpacking The DCS-1000
Carefully remove all items from the package.
In addition to this User’s Guide,
be certain that you have:
•
One Internet Camera
•
One Installation CD-ROM
•
One AC power adapter suitable for your country’s electric power
•
One Camera Stand
•
One Category 5 Ethernet Cable
•
This Manual
If any item is missing, or if you find any damage or mismatch, promptly
contact your dealer for assistance.
Connecting DCS-1000 to the Camera Stand
DCS-1000 comes with a camera stand
with a swivel ball screw head that can
be attached to DCS-1000's bottom screw
hole.
Attach the camera stand to DCS-1000
and station it for your application.
There are
three holes located in the base of the camera
stand allowing the DCS-1000 to be mounted
on the ceiling or any wall securely.
Page 10 / 83
9
Hardware Installation
This section describes the Hardware installation procedure for DCS-1000.
1. Connect an Ethernet cable
Connect an Ethernet cable to the
network cable connector located
on DCS-1000’s rear panel and
attach it to the network.
2. Attach the external power supply
Attach the external power supply
to the DC power input connector
located on DCS-1000’s rear panel
and is labeled DC 5V and connect
it to your local power supply.
Note:
Confirm power source is supplied
from the LED indicators label Power
on DCS-1000 is illuminated.

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top