78
Adjust Internet Camera Focus
DCS-1000 features an exchangeable CS-type lens that can be used for
different applications as necessary.
It supports rotational focus control so the
lens can be adjusted to focus under normal and stable conditions to maximize
the image quality of DCS-1000.
To adjust the focus of the lens you need to turn the lens slowly in either
clockwise or anti-clockwise direction until the desired image appears.
DO
NOT over turn the lens in either of the directions as it will be out of focus.
Unless you want to substitute the lens DO NOT unscrew more than 1.0mm
apart from the Fixed Lens Assembly.
Keep in mind while adjusting DCS-1000's focus you can review the image
quality from the Web browser.
Note
:
You can further adjust the DCS-1000's image quality through the Web
Configuration under System Administration - Image.
Please refer to Web
Configuration section for further details.
Warning
Direct exposure to sunlight may cause permanent damage to the CMOS sensor.
Therefore do not expose the Internet Camera’s lens directly to sunlight.
When operation
is required in glaring light environment, it is recommended to use an iris lens.
The Internet Camera is designed for indoor usage and if your application requires prolong
exposure to sunlight, a sun visor is recommended to protect the Internet Camera.
Camera Lens
Adjust by turning
clockwise or anti-clockwise
Fixed Lens Assembly
DO NOT adjust
19216811.live