1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DAP-3520
    5. /
  5. 9
Page 41 / 72 Scroll up to view Page 36 - 40
37
D-Link DAP-3520 User Manual
Gateway:
Enter the IP address of the gateway on the network.
WINS:
Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines the IP
address of a network computer that has a dynamically assigned IP address.
DNS:
Enter the IP address of the Domain Name System (DNS) server. The DNS server translates domain names such as www.dlink.com into
IP addresses.
Domain Name:
Enter the domain name of the network, if applicable. (An example of a domain name is: www.dlink.com.)
Lease Time (60-31536000 sec):
The lease time is the period of time before the DHCP server will assign new IP addresses.
Page 42 / 72
38
D-Link DAP-3520 User Manual
Static Pool Setting
Function Enable/Disable:
Dynamic Host Configuration Protocol (DHCP) assigns
IP addresses to wireless devices on the network.
This protocol simplifies network management and
allows new wireless devices to receive IP addresses
automatically without the need to manually assign IP
addresses. Select
Enable
to allow the DAP-3520 to
function as a DHCP server.
Host Name:
Enter a name for the assigned client.
Assigned IP:
Use the Static Pool Settings to assign the same IP
address to a device every time you start up. The IP
addresses assigned in the Static Pool list must NOT
be in the same IP range as the Dynamic Pool. After
you have assigned a static IP address to a device via
its MAC address, click
Apply
; the device will appear in
the Assigned Static Pool at the bottom of the screen.
You can edit or delete the device in this list.
Assigned MAC Address:
Enter the MAC address of the device requesting
association here.
Subnet Mask:
Define the submask of the IP address specified in the
“IP Assigned From” field.
Gateway:
Specify the Gateway address for the wireless network.
The DHCP address pool defines the range of IP addresses that can be assigned to stations on the network. A static pool allows specific
wireless stations to receive a fixed IP without time control.
Page 43 / 72
39
D-Link DAP-3520 User Manual
WINS:
Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS
is a system that determines the IP
address of a network computer with a dynamically assigned IP address, if applicable.
DNS:
Enter the Domain Name System (DNS) server address for the wireless network. The DNS server translates domain names such as
www.dlink.com into IP addresses.
Domain Name:
Specify the domain name for the network.
Page 44 / 72
40
D-Link DAP-3520 User Manual
Current IP Mapping List
This window displays information about the current assigned DHCP dynamic and static IP address pools. This information is available
when you enable DHCP server on the AP and assign dynamic and static IP address pools.
Current DHCP Dynamic Pools:
These are IP address pools the DHCP server has assigned
using the dynamic pool setting.
Host Name:
The host name of the client.
Binding MAC Address:
The MAC address of a device on the network that is assigned
an IP address from the DHCP dynamic pool.
Assigned IP Address:
The current corresponding DHCP-assigned IP address of the
device.
Lease Time:
The length of time that the dynamic IP address will be valid.
Current DHCP Static Pools:
These are the IP address pools of the DHCP server assigned
through the static pool settings.
Host Name:
The host name of the client.
Binding MAC Address:
The MAC address of a device on the network that is within the
DHCP static IP address pool.
Assigned IP Address:
The current corresponding DHCP-assigned static IP address
of the device.
Page 45 / 72
41
D-Link DAP-3520 User Manual
Filters
Wireless Band:
Displays the current wireless band rate.
Access Control List:
Select
Disable
to disable the filters function.
Select
Accept
to accept only those devices with MAC
addresses in the Access Control List. All other devices not
on the list will be rejected.
Select
Reject
to reject the devices with MAC addresses
on the Access Control List. All other devices not on the list
will be accepted.
MAC Address:
Enter each MAC address that you wish to include in your
filter list, and click
Apply
.
MAC Address List:
When you enter a MAC address, it appears in this list.
Highlight a MAC address and click
Delete
to remove it
from this list.
Wireless MAC ACL

Rate

4.7 / 5 based on 3 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top