Page 61 / 72
Scroll up to view Page 56 - 60
57
D-Link DAP-3520 User Manual
Ping Control Setting
Each of the six main categories display various hidden
administrator parameters and settings.
Status:
Check the box to enable Ping control.
Page 62 / 72
58
D-Link DAP-3520 User Manual
Firmware and SSL Certification Upload
Upload Firmware From Local Hard Drive:
The current firmware version is displayed above the file location
field. After downloading the most recent version of firmware for the
computer, use the
Browse
button to locate the firmware
file on your computer.
Click
Upload
to update the firmware
version. Please do not turn the power off while upgrading.
Upload SSL Certification From Local Hard Drive:
Click
Browse
to locate the SSL Certification file on your local
computer. After selecting and opening the file, click
Upload
to upload the file to the DAP-3520.
Page 63 / 72
59
D-Link DAP-3520 User Manual
Configuration File
Upload File:
Click the
Browse
button to locate a previously saved
configuration file on your local computer. After selecting the
file, click
Upload
to apply the configuration settings to the
DAP-3520.
Download Configuration File:
Click
Download
to save the current DAP-3520 configuration
to your local computer.
Note that if you save one configuration with the administrator’s
password now, after resetting your DAP-3520, and then
updating to this saved configuration file, the password will
be gone.
Page 64 / 72
60
D-Link DAP-3520 User Manual
Time and Date
Current Time:
Displays the current time and date settings.
Time Zone:
Use the drop-down menu to select your correct
Time Zone.
Enable Daylight Saving:
Check the box to Enable Daylight Saving Time.
Daylight Saving Offset:
Use the drop-down menu to select the correct Daylight
Saving offset.
Daylight Saving Dates:
Use the drop-down menu to select the correct Daylight
Saving offset.
Enable NTP Server:
Check to enable the AP to get system time from an NTP
server.
NTP Server:
Enter the NTP server IP address.
Set the Date and Time Manually:
You can either manually set the time for your AP here, or
you can click the
Copy Your Computer’s Time Settings
button to copy the time from the computer you are using
(Make sure that the computer’s time is set correctly).
Page 65 / 72
61
D-Link DAP-3520 User Manual
System
Restart the Device:
Click
Restart
to restart the DAP-3520.
Restore to Factory Default Settings:
Click
Restore
to restore the DAP-3520 back to factory
default settings.
System Settings
19216811.live