Page 21 / 72
Scroll up to view Page 16 - 20
17
D-Link DAP-3520 User Manual
Wireless Client Mode
Wireless Band:
Select either
2.4GHz
or
5GHz
from the drop-down menu.
Mode:
Wireless Client
mode is selected from the drop-down
menu.
Network Name (SSID):
Service Set Identifier (SSID) is the name designated for a
specific wireless local area network (WLAN). The SSID’s
factory default setting is
dlink
. The SSID can be easily
changed to connect to an existing wireless network or to
establish a new wireless network.
SSID Visibility:
This option is unavailable in wireless client mode.
Auto Channel Selection:
Enabling this feature automatically selects the channel that
will provide the best wireless performance. This feature is
not supported in Wireless Client mode.
Channel:
The channel will be determined by the access point that the
DAP-3520 is connected to.
Channel Width:
Allows you to select the channel width you would like to
operate in. Select
20 MHz
if you are not using any 802.11n
wireless clients.
Auto 20/40 MHz
allows both 802.11n and
non-802.11n wireless devices on your network.
Page 22 / 72
18
D-Link DAP-3520 User Manual
Site Survey:
Site Survey will display available wireless networks. Click on the
Scan
button to search for available wireless networks, then click on the
name of the wireless network that you want to connect to.
Clone MAC Address:
Click
Enable
to allow you to clone a MAC address to the access point. If you select
Auto
from the
MAC Source
drop-down, it will copy
the first MAC address found in the LAN port.
Next to
MAC Address
, enter the MAC address you would like to clone.
Authentication:
Use the drop-down menu to choose
Open System
or
WPA-Personal
.
• Select
Open System
to communicate the key across the network.
• Select
WPA-Personal
to secure your network using a password and dynamic key changes. No RADIUS server is required.
Page 23 / 72
19
D-Link DAP-3520 User Manual
WEP Encryption
*
Hexadecimal (HEX)
digits consist of the numbers 0-9 and the letters A-F.
**
ASCII (American Standard Code for Information Interchange)
is a code that represents English letters using numbers ranging from 0-127.
Authentication:
Select either
Open System
or
Shared Key
.
Encryption:
Click to Enable or Disable Encryption.
Key Type:
Select
HEX*
or
ASCII**
.
Key Size:
Select
64-bit
or
128-bit
Encryption.
Key Index (1-4):
Select the 1st
through the 4th key to be the active key.
Key:
Input up to four keys
for encryption. You will select one of these
keys in the Key Index drop-down menu.
Network Key:
Enter the WEP encryption key.
Confirm Key:
Retype the network key.
Page 24 / 72
20
D-Link DAP-3520 User Manual
WPA-Personal Authentication
WPA Mode:
When
WPA-Personal
is selected for Authentication type, you must also
select a WPA mode from the drop-down menu:
AUTO (WPA or WPA2)
,
WPA2 Only
, or
WPA Only
. WPA and WPA2 use different algorithms.
AUTO (WPA or WPA2)
allows you to use both WPA and WPA2.
Cipher Type:
When you select
WPA-Personal
, you must also select
AUTO, AES
, or
TKIP
from the drop-down menu.
Group Key Update Inverval:
Select the interval during which the group key will be valid. The default
value of
1800
is recommended.
PassPhrase:
When you select
WPA-Personal
, please enter a PassPhrase
in the
corresponding field.
Confirm PassPhrase:
Retype the PassPhrase
in the corresponding field.
Page 25 / 72
21
D-Link DAP-3520 User Manual
WPA-Enterprise Authentication
WPA Mode:
When
WPA-Enterprise
is selected, you must also select a WPA
mode from the drop-down menu:
AUTO (WPA or WPA2)
,
WPA2
Only
, or
WPA Only
. WPA and WPA2 use different algorithms.
AUTO
(WPA or WPA2)
allows you to use both WPA and WPA2.
Cipher Type:
When WPA-Enterprise is selected, you must also select a cipher
type from the drop-down menu:
Auto
,
AES
, or
TKIP
.
Group Key Update Inverval:
Select the interval during which the group key will be valid. The default
value of
1800
is recommended.
Network Access Protection:
Enable or disable Microsoft Network Access Protection.
RADIUS Server:
Enter the IP address of the primary RADIUS server. You must also
configure RADIUS port and RADIUS secret. In addition to a primary
RADIUS server, the AP allows you to set up an optional backup
RADIUS server.
RADIUS Port:
Enter the RADIUS port.
RADIUS Secret:
Enter the RADIUS secret.
19216811.live