Page 41 / 97
Scroll up to view Page 36 - 40
³1
D-Link DAP-1555 User Manual
Section ² - Configuration
The number of seconds of idle time until the access point considers the session terminated. The initial value of Time Out
depends on the type and state of the connection.
300 seconds
UDP connections.
240 seconds
Reset or closed TCP connections. The connection does not close instantly so that lingering packets can pass or the connection
can be re-established.
7800 seconds
Established or closing TCP connections.
Time out:
Page 42 / 97
³±
D-Link DAP-1555 User Manual
Section ² - Configuration
Help
Page 43 / 97
³²
D-Link DAP-1555 User Manual
Section ² - Configuration
Configuration for Bridge Mode
This section will show you how to configure your new D-Link wireless MediaBridge using the web-based configuration
utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser
such as Internet Explorer and enter the friendly address
for
Bridge mode (dlinkap).
Select
Admin
from the drop-down menu and then enter
your password. Leave the password blank by default.
If you get a
Page Cannot be Displayed
error, please
refer to the
Troubleshooting
section for assistance.
Page 44 / 97
³³
D-Link DAP-1555 User Manual
Section ² - Configuration
This wizard is designed to assist you in configuring the wireless settings for your bridge. It will guide you through
step-by-step instructions on how to setup your wireless network.
Click
Launch Wireless Setup Wizard
to begin.
Click
Launch Wireless Setup Wizard
Setup Wizard
Enter the Device Name of the AP and click
Next
to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
Page 45 / 97
³5
D-Link DAP-1555 User Manual
Section ² - Configuration
Select
Auto
configuration if you want to use Wi-Fi
Protected Setup.
If you want to setup your network manually, skip to page
50.
Click
Next
to continue.
If you want to change the admin account password,
enter a new password and click
Next
.
19216811.live