51

D-Link DAP-1555 User Manual

Section ² - Configuration

The Wireless Setup Wizard is complete.

Click

Finish

to reboot the device.

If you choose

WPA2

, enter the WPA2 Personal Passphrase and

click

Next

to complete the Setup Wizard.

If you choose

WPA

, enter the WPA Personal Passphrase and click

Next

to complete the Setup Wizard.

5±

D-Link DAP-1555 User Manual

Section ² - Configuration

Wireless Mode:

Site Survey:

Enable Wireless:

Wireless Network

Name:

Enable Auto

Channel Scan:

Wireless Channel:

802.11 Mode:

Select Infrastructure to connect to a wireless (AP) Access

Point, select Ad-hoc to connect to another bridge or wireless

station.

A function that looks for available wireless networks.

Check the box to enable the wireless function. If you do

not want to use wireless, uncheck the box to disable all the

wireless functions.

Service Set Identifier (SSID) is the name of your wireless

network. Create a name using up to 32 characters. The SSID

is case-sensitive.

The

Auto Channel Scan

setting can be selected to allow

the DAP-1555 to choose the channel with the least amount

of interference.

Indicates the channel setting for the DAP-1555. By default

the channel is set to 6. The Channel can be changed to fit

the channel setting for an existing wireless network or to

customize the wireless network. If you enable

Auto Channel

Scan

, this option will be greyed out.

If all of the wireless devices in your wireless network can connect in the same transmission mode, you can improve performance

slightly by choosing the appropriate “Only” mode. If you have some devices that use a different transmission mode, choose

the appropriate “Mixed” mode.

Mixed 802.11a and 802.11g

- Select this so the bridge can site survey to 802.11a and 802.11g networks.

Mixed 802.11a, 802.11g and 802.11b

- Select this so the bridge can site survey to 802.11a, 802.11g and 802.11b networks.

Mixed 802.11a, 802.11g and 802.11ng

- Select this so the bridge can site survey to 802.11a, 802.11g and 802.11ng networks.

802.11ng means it’s 802.11n operated in 2.4GHz band.

Mixed 802.11a, 802.11g, 802.11ng and 802.11b

- Select this so the bridge can site survey to 802.11a, 802.11g, 802.11ng

and 802.11b networks.

Mixed 802.11na, 802.11a, 802.11g

- Select this so the bridge can site survey to 802.11na, 802.11a and 802.11g networks.

802.11na means it’s 802.11n operated in 5GHz band.

Wireless

5²

D-Link DAP-1555 User Manual

Section ² - Configuration

Transmission Rate:

Channel Width:

Security Mode:

Enable:

Mixed 802.11na, 802.11a, 802.11g and 802.11b

- Select this so the bridge can site survey to 802.11na, 802.11a, 802.11g,

and 802.11b networks.

Mixed 802.11na, 802.11a, 802.11ng and 802.11g

- Select this so the bridge can site survey to 802.11na, 802.11a, 802.11ng

and 802.11g networks.

Mixed 802.11na, 802.11a, 802.11ng, 802.11g and 802.11b

- Select this so the bridge can site survey to 802.11na, 802.11a,

802.11ng, 802.11g and 802.11b networks.

Select the transmit rate. It is strongly suggested to select

Best (Auto)

for best performance.

Select the Channel Width:

Auto 20/40

- Select if you are using both 802.11n and non-802.11n wireless devices.

20MHz

- Select if you are not using any 802.11n wireless clients.

Refer to page 65 for more information regarding wireless security.

Enable the Wi-Fi Protected Setup feature.

5³

D-Link DAP-1555 User Manual

Section ² - Configuration

IP Address Mode:

IP Address:

Subnet Mask:

Default Gateway:

Device Name:

Select Static if your ISP assigned you the IP

address, subnet mask, gateway, and DNS server

addresses. Select DHCP to automatically assign

an IP address to the computers on the LAN/private

network.

Enter the IP address assigned by your ISP.

Enter the Subnet Mask assigned by your ISP.

Enter the Gateway assigned by your ISP.

Enter the Device Name of the AP and click

Next

to

continue. It is recommended to change the Device

Name if there is more than one D-Link device within

the subnet.

This section will allow you to change the local network settings of the bridge and to configure the Static settings.

Network Settings

Static

55

D-Link DAP-1555 User Manual

Section ² - Configuration

DHCP

Select DHCP to automatically obtain an IP address

on the LAN/private network.

Enter the Device Name of the AP and click

Next

to

continue. It is recommended to change the Device

Name if there is more than one D-Link device within

the subnet.

LAN Connection

Type:

Device Name: