Page 36 / 97 Scroll up to view Page 31 - 35
²´
D-Link DAP-1555 User Manual
Section ² - Configuration
General:
LAN:
Wireless LAN:
Displays the access point’s time and firmware
version.
Displays the MAC address and the private (local)
IP settings for the access point.
Displays the wireless MAC address and your
wireless settings such as SSID and Channel.
Status
Device Info
This page displays the current information for the DAP-1555. It will display the LAN and Wireless information.
Page 37 / 97
²µ
D-Link DAP-1555 User Manual
Section ² - Configuration
Wireless
The wireless section allows you to view the wireless clients that are connected to your wireless access point.
MAC Address:
IP Address:
Mode:
Rate:
Signal:
The Ethernet ID (MAC address) of the wireless
client.
The LAN-side IP address of the client.
The transmission standard being used by the client.
Values are 11a, 11b, 11g, 11ng or 11na for 802.11a,
802.11b, 802.11g or 802.11n respectively.
Displays the actual transmission rate of the client
in megabits per second.
This is a relative measure of signal quality. The value is expressed as a percentage of theoretical best quality. Signal quality
can be reduced by distance, by interference from other radio-frequency sources (such as cordless telephones or neighboring
wireless networks), and by obstacles between the access point and the wireless device.
Page 38 / 97
²¶
D-Link DAP-1555 User Manual
Section ² - Configuration
View Levels:
Apply Log Settings:
Refresh:
Clear:
Save Log:
There are three levels of message importance:
Informational, Warning, and Critical. Select the
levels that you want displayed in the log.
Will filter the log results so that only the selected
options appear.
Updates the log details on the screen so it displays
any recent activity.
Clears all of the log contents.
This option will save the access point to a log file
on your computer.
Logs
The access point automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough
internal memory for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option
allows you to view the access point logs. You can define what types of events you want to view and the level of the
events to view. This access point also has external Syslog Server support so you can send the log files to a computer
on your network that is running a Syslog utility
Page 39 / 97
²·
D-Link DAP-1555 User Manual
Section ² - Configuration
Statistics
The Statistics page displays all of the LAN, WAN, and Wireless packets transmit and receive statistics.
Sent:
Received:
TX Packets
Dropped:
RX Packets
Dropped:
Collisions:
Errors:
The number of packets sent from the access
point.
The number of packets received by the access
point.
Displays the number of packets that were dropped
while sending, due to errors, collisions, or access
point resource limitations.
Displays the number of packets that were dropped
while receiving, due to errors, collisions, or access
point resource limitations.
Displays the number of packets that were dropped
due to Ethernet collisions (two or more devices
attempting to use an Ethernet circuit at the same
time).
The number of transmission failures that cause loss
of a packet. A noisy radio-frequency environment
can cause a high error rate on the wireless LAN.
Page 40 / 97
³0
D-Link DAP-1555 User Manual
Section ² - Configuration
Wish Sessions
The WISH Sessions page displays full details of active local wireless sessions through your access point when WISH
has been enabled. A WISH session is a conversation between a program or application on a wirelessly connected
LAN-side computer and another computer, however connected.
Originator:
Target:
Protocol:
State:
Priority:
The IP address and, where appropriate, port
number of the computer that originated a network
connection.
The IP address and, where appropriate, port number
of the computer to which a network connection has
been made.
The communications protocol used for the
conversation.
State for sessions that use the TCP protocol.
• NO: None -- This entry is used as a placeholder for a future connection that may occur.
• SS: SYN Sent -- One of the systems is attempting to start a connection.
• EST: Established -- the connection is passing data.
• FW: FIN Wait -- The client system has requested that the connection be stopped.
• CW: Close Wait -- the server system has requested that the connection be stopped.
• TW: Time Wait -- Waiting for a short time while a connection that was in FIN Wait is fully closed.
• LA: Last ACK -- Waiting for a short time while a connection that was in Close Wait is fully closed.
• CL: Closed -- The connection is no longer active but the session is being tracked in case there are any
retransmitted packets still pending.
The priority given to packets sent wirelessly over this conversation by the WISH logic. The priorities are:
• BK: Background (least urgent)
• BE: Best Effort
• VI: Video
• VO: Voice (most urgent)

Rate

4 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top