Page 26 / 52
Scroll up to view Page 21 - 25
26
3. Using Configuration Menu
After configuration of your network, you can access the Router via Web browser and type the
IP
Address
of Router. The default IP address of this Router is shown as following.
Please note that if you have changed the default IP Address assigned to the Router, make sure to
enter the correct
IP Address.
Then the
“Password”
dialogue will be shown up.
The default “User Name” is null.
The
default “Password” is “admin”.
Please refer to
“Device Admin”
page to check how to change
your password.
Page 27 / 52
27
3.1 Basic Setup
After enter user name and password, the configuration utility will show up. The first page is
“Basic Setup”
. You can set up your connection type to your ISP. When finishing setting, click
“Apply”
button to save. If you skip pressing
“Apply”
button, the system will reset automatically.
Note: After applying these settings, sometimes connection information is stored on the modem
and needs to be updated. You may need to shut down and restart your modem.
1. Host Name & Domain Name
Some ISPs required these names as identification. You may check with your ISP to see if
your Broadband Internet Service has been configured with a host and domain name
(like
CX-1234-56789)
. In most cases, leaving fields blank will work.
2. Private IP Address
IP Address of this router used by the internal LAN. The default value is
192.168.1.1
for IP
Address and
255.255.255.0
for Subnet Mask. In most applications, you should not change
the
“IP address”
from the default
(192.168.1.1)
. However, if you are implementing your
router into an existing network, you may need to change it to match your current addressing
scheme.
Page 28 / 52
28
3. Public IP Address
The Public IP Address and Subnet Mask of this router are used by external users of the
Internet (including your ISP). Choose one of connection type,
“DHCP”
or
“PPPoE”
or
“Static IP Address”
or
“PPTP”.
Select
“DHCP”
or
“PPPoE”
if these values are to be automatically assigned to the router by your ISP.
If a fixed Public IP Address is to be used, select
“Static IP Address”
and enter the IP Address and
Public Subnet Mask provided by your ISP
.“PPTP”
mostly used in Europe. Choose this type of
connection, if you connect to your ISP by PPTP.
After choosing connection type, the corresponding option will show up for more detail
setting.
•
DHCP
If your
IP Address
is provided by your
ISP dynamically,
choose this option.
Pre-request IP:
Enter the IP address if your ISP need it.
MTU:
Enter the MTU value you want to set. We recommend to keep the default value.
Page 29 / 52
29
•
PPPoE
User Name:
Your User Name provided by your
ISP.
Password:
Your password provided by your
ISP.
ISP Name:
Your ISP name.
Connect on Demand:
When you enable this function, then the router will connect to your
ISP
under
your command.
Disconnect when network idle:
You can set the network idle time to disconnect. If you set the time
“0”,
this function will be disabled.
Page 30 / 52
30
•
Static IP Address
Static IP Address:
Enter the IP Address provided by your
ISP.
Public Subnet Mask:
Enter the Subnet Mask provided by your
ISP.
Default Gateway IP Address:
Enter the Gateway IP Address provided by your
ISP.
Domain Name Server 1:
Enter the Domain Name server Address provided by your
ISP.
19216811.live