Page 46 / 52 Scroll up to view Page 41 - 45
46
3.15 Connection Log
This table displays the connection history of PPPoE and DHCP. You can click “Reload” to get the latest
status.
Page 47 / 52
47
3.16 Time Settings
Select your local time zone by selecting in the drop down menu. If you want to configure this router’s
time an date munally, enter the time and date in the column and enable this feature. If you disable this
feature, the router will use the Internet time settings.
3.17 UPnP
UPnP
stands for Universal Plug and Play.
UPnP
service allows computers to discover and use
network-based devices.
Windows ME and XP
include native
UPnP
services;
Windows 98
and
98SE
do not include a native
UPnP
service, but you can install via the Internet Connection
Sharing client shipped with Windows
XP.
Select
Enable/Disable
to enable this function or disable. Then click
“Apply”
and the router will
reboot automatically. After a few second, complete window will show up.
Page 48 / 52
48
4. Install Printer Server
Insert the CD-ROM into the CD-ROM drive
The following window is shown automatically. If not, please find setup.exe on the CD-ROM\
Printer Server. And click
“Installing Printer Software”
. The Printer Server Driver only supports
Window 98/ME/2000/XP.
• Sys
tem will auto run setup program
The setup wizard will lead you to complete the installation. Click
“Next”
to proceed.
Page 49 / 52
49
• Finish the installation
Click
“Finish”
to complete the installation. Select the checkbox to open readme file or not.
Note:
Please refer to Printer Server’s User Guide to see more details.
Page 50 / 52
50
5. Trouble Shooting
No lights are lit on the router
The router has no power.
• Make sure the power cord is properly connected to the router.
• Make sure the power adapter is properly connected to a functioning power outlet. If it’s in a
power strip, make sure the power strip is turned on.
• Make sure you are using the correct power adapter
(DC 7.5V, 1Amp).
There is no numbered light lit for a connected device
There’s a hardware connection problem.
• Make sure the cable connectors are securely plugged in at the router and the device.
• Make sure the connected device is turned on.
• Be sure the correct cable is used. For computers, use a
Category 5
Ethernet patch cable. For
other devices, you may need a cross-over cable or may need to use the uplink port.
Why my browser can not open the router’s on-line configuration program
You may need to download and install the Java Plug-in for your Operating System. Please
refer to
CD-ROM
to install. Or upgrade your browser to
Internet Explorer 5.5
and higher (with
SP1
),
Netscape 6.0
and
higher, Mozilla 5.0
and higher,
Opera 6.0
and higher
After setting up my router, I can not play on-line game
The Broadband Router uses Network Address Translation to issue several private
(virtual) IPs
using one public
IP address
Internet games communicate with each other based on IP addresses and
UDP
port numbers. Unfortunately, some games will be affected when
NAT
is applied. Gamers would not
communicate with each other due to the side effect created by
NAT
. Such games and applications are
called
NAT
unfriendly applications. You can setup
“Special Application”
on this router. Consult your
game vender for correct port setting.
If you want to host the Internet game for your parties to join it is better for you to set one
computer host that you are playing on to be a
DMZ
host. You will need to tell your parties to
join your game on the
IP address
of the
WAN
interface of the router device. Do not tell your
parties of the virtually local
IP address
assigned from the
DHCP
function of the router device
or you see in the game or the computer host.
If your Internet connection service is an
ADSL PPPoE
or cable modem connection, please check
the IP address of the WAN interface at every new Internet connections.

Rate

4 / 5 based on 1 vote.

Popular Digitus Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top