DG-BG4100N User

Manual

11

2

Hardware Installation

Step 1

Connect the ADSL interface of the device and the router interface of the splitter

through a telephone cable. Connect the phone to the Phone interface of the

splitter through a telephone cable. Connect the incoming line to the Line interface

of the splitter.

The splitter has three interfaces:



Line: Connect to a wall phone jack (RJ-11 jack).



Router: Connect to the ADSL jack of the device.



Phone: Connect to a telephone set.

Step 2

Connect the LAN interface of the device to the network card of the PC through an

Ethernet cable (MDI/MDIX).

Note:

Use twisted-pair cables to connect to the hub or switch.

DG-BG4100N User

Manual

12

Step 3

Plug one end of the power adapter to the wall outlet and connect the other end to

the Power interface of the device.

The following figure shows the application diagram for the connection of the router, PC,

splitter and the telephone sets.

DG-BG4100N User

Manual

13

2.1

Software Installation



Insert the Setup CD into your CD-ROM drive of notebook/desktop computer.



Explore the CD and execute the “

India_autorun.exe

” file. Screen given below will be

displayed. Click ‘

Start’

to continue.

DG-BG4100N User

Manual

14



Connect the ADSL line and the phone line to the router. Click ‘

Next

’.



Connect the power adapter to the AC Mains and the other end to the power interface

on the router. Push the power button on the router to power up the device. Click

‘

Next

’.

DG-BG4100N User

Manual

15



Connect the Ethernet interface on the router to the LAN card on the computer using

the Ethernet cable. Click ‘

Next

’.



After powering up the router, verify the status of the LED indicators on the front panel of

the router. Click ‘

Next

’.