Page 41 / 178 Scroll up to view Page 36 - 40
Add Other Computer to Your Network: Wired Connection
Display instruction to connect the computer to the network via wireless channel.
Page 42 / 178
Congratulations
You have successfully connected the PC to the network.
Page 43 / 178
Back to Top
Back to Contents Page
Page 44 / 178
Back to Contents Page
Control Utility:
Dell™ TrueMobile™ 2300 Wireless Broadband Router User's
Guide
The
Control Utility
is a Windows-based software that allows you to configure your router and monitor the status of the
connection from your computer to the Wireless Broadband Router and to Internet.
Install the Control Utility
Uninstall the Control Utility
Start the Control Utility
Exit the Control Utility
How to Configure the Router by the Control Utility?
Install the Control Utility
You can install the control utility on your PC when you step through the setup process using the Setup Wizard.
1. Insert the
TrueMobile 2300 Wireless Broadband Router Setup Wizard and User Guide CD
into the CD drive. Your CD
should automatically launch the
Setup Wizard
program.
If it does not, complete the following steps to start the
Wizard
.
a. Go to
Start
>
Run
.
b. Type x:\setup.exe (where "x" is the driver letter of your CD-ROM drive.)
2. From the main menu, click
Installation
, and then click either
Setup First Computer
or
Setup Additional Computers.
3. Follow the instruction on the screen until you have successfully completed the installation process.
Back to Top
Uninstall the Control Utility
1. If the router icon is displayed in the system tray, right click the router icon and select
Exit
.
2. Click
Start
>
Control Panel
>
Add/Remove Program
.
3. Select the
Control Utility
from the program list and remove it as instructed.
Back to Top
Page 45 / 178
Start the Control Utility
The control utility program is by default set up to run automatically upon each system startup. If the utility does not start
automatically, click
Start
->
Programs
->
Dell TrueMobile 2300 Wireless Broadband Router
->
Dell Control Utility
to invoke
the utility program.
Once running, a router icon is created in the system tray. If you have a good connection to the Internet, the system tray icon
looks like this
. You can Double-click the router icon to open the utility panel.
Note: If the icon is in yellow
, it indicates that the Internet connection is not active. If the icon is in red
, it
indicates that the connection to the router has failed.
Back to Top
Exit the Control Utility
When you start the control utility program, it will place a small icon like this
to the system tray. If you want to exit the
program, right-click the utility icon docked in the system tray to open a menu. Select
Exit
from the menu to quit the program.
Note: If you click close button on the window title bar, it only hides Control Utility panel, not really exiting the
program.
Back to Top
Back to Contents Page

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top