1. Home
    2. /
  2. Manuals
    3. /
  3. Cisco
    4. /
  4. DDR2201v1
    5. /
  5. 30
Page 146 / 272 Scroll up to view Page 141 - 145
Chapter 5
Home Network Configuration
124
4036168 Rev B
1
Click the
WAN Setup
tab, and then click
Add
to set up a new WAN interface.
The WAN Setup screen appears as shown below.
2
From the Broadband Connect Type drop-down list, choose the appropriate
connection type: PPPoE (as in the example above), IPoE, or Bridging.
3
Check the
VLAN Mux
checkbox, and then enter the VLAN ID used by your
WAN interface.
4
Configure the remaining credentials as appropriate for your WAN interface.
5
Check the
Enable WAN Service
check box at the bottom of the screen.
6
Click
Save
to save your settings.
7
Repeat steps 1-6 above for any additional VLAN services that need to be added.
Page 147 / 272
LAN Setup
4036168 Rev B
125
LAN Setup
The Local Area Network (LAN) Setup screen allows users to set up LAN settings
such as Dynamic Host Configuration Protocol (DHCP), Internet Gateway Multicast
Protocol (IGMP), and Universal Plug and Play (UPnP).
Path
:
Home Network > LAN Setup
Page 148 / 272
Chapter 5
Home Network Configuration
126
4036168 Rev B
Configuring the LAN Interface
To configure the LAN interface, complete the following steps.
1
Click
Home Network
on the main screen. The Client Summary screen opens.
2
Click
LAN Setup.
The Local Area Network (LAN) setup screen opens.
3
In the IP Address field, enter the IP address for the residential gateway.
4
In the Subnet Mask field, enter the subnet mask for the residential gateway.
5
Do you want to enable UPnP?
Page 149 / 272
LAN Setup
4036168 Rev B
127
If
yes
, check the Enable UPnP check box.
If
no
, clear the Enable UPnP check box.
6
Do you want to Enable the DHCP server?
If
yes
, select Enable DHCP Server, and go to step 7.
If
no
, select Disable DHCP Server, and go to step 8.
7
Under Enable DHCP server, enter the following information:
a
In the Start IP Address field, enter the first IP address in the range for the
DHCP IP address lease pool.
b
In the End IP Address field, enter the last IP address in the range for the
DHCP IP address lease pool.
c
In the Subnet Mask field, enter the subnet mask for the DHCP server.
d
In the Leased Time (hour) field, enter the duration of the DHCP lease
address.
8
Click
Save
to save the changes or click
Save/Reboot
to save the changes and
reboot the residential gateway.
Reserving IP Addresses
The Address Reservation screen allows you to reserve IP addresses for specific
devices. For example, you can reserve IP addresses for your laptop or PC in your
home.
Path
:
Home Network > LAN Setup > Address Reservation
To reserve a specific IP address for a specific MAC address, complete the following
steps.
Page 150 / 272
Chapter 5
Home Network Configuration
128
4036168 Rev B
1
Click
Home Network
on the main screen. The Client Summary screen opens.
2
Click
LAN Setup.
The Local Area Network (LAN) setup screen opens.

Rate

4 / 5 based on 1 vote.

Popular Cisco Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top