Page 126 / 272 Scroll up to view Page 121 - 125
Chapter 4
DSL Configuration
104
4036168 Rev B
ADSL Tone Settings
The ADSL Tone Settings screen allows you to select active DSL tones or frequencies
used by the DSL transceiver.
Path
:
DSL > Setting > Advanced Settings > Tone Selection
Setting DSL Tones or Frequencies
To set DSL tones or frequencies, complete the following steps.
1
Click
DSL
on the main screen. The Summary screen opens by default.
2
Click the
Setting
tab. The DSL Settings screen opens.
Page 127 / 272
ADSL Tone Settings
4036168 Rev B
105
3
Click
Advanced Settings
. The DSL Advanced Settings screen opens.
4
Click
Tone Selection
. The ADSL Tone Settings screen opens.
5
Select the ADSL tone settings as follows.
To select all the tones, click
Check All.
To select individual tones, click
Clear All
and then select the tones you want.
6
Click
Apply
to configure the tone settings.
7
Click
Close
to return to the DSL Advanced Settings screen.
Page 128 / 272
Page 129 / 272
4036168 Rev B
107
The Home Network tab allows you to check the home network
configuration. You use this tab to configure and check the status of the
devices connected to your home network.
5
Chapter 5
Home Network Configuration
In This Chapter
Client Summary
..................................................................................
108
WAN Quick Setup
..............................................................................
112
LAN Setup
...........................................................................................
125
Wireless Summary
..............................................................................
130
Wireless Basic
......................................................................................
131
Wireless Security
.................................................................................
140
Wireless MAC Filtering
.....................................................................
149
Wireless Bridge
...................................................................................
153
Wireless Station List
...........................................................................
155
Wi-Fi Protected Setup
........................................................................
157
HPNA Information
.............................................................................
159
Page 130 / 272
Chapter 5
Home Network Configuration
108
4036168 Rev B
Client Summary
The Client Summary screen shows all the client devices (Wired/Wireless/HPNA)
attached to the residential gateway on the LAN side. You can click
Show HPNA
Client
to display the HPNA devices attached to the HPNA RF interface of the
residential gateway.
Path
:
Home Network > Summary > Show HPNA Client
Updating HPNA Clients
To update the HPNA clients, complete the following steps.
1
Click
Home Network
on the main screen.
2
Click
Summary
. The Client Summary screen opens.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top