1. Home
    2. /
  2. Manuals
    3. /
  3. Cisco
    4. /
  4. DDR2201v1
    5. /
  5. 28
Page 136 / 272 Scroll up to view Page 131 - 135
Chapter 5
Home Network Configuration
114
4036168 Rev B
3
Click Add to configure a new WAN interface, or click Edit to edit an existing
WAN interface.
4
In the Broadband Type field, select
DSL
.
5
In the DSL Mode field, select
ATM
. More fields populate on the screen.
6
Complete the following fields on the screen as follows:
Note
: This configuration is an example of a specific setting for the residential
gateway. Your values may differ depending upon your service provider.
a
In the Broadband Connect Type field, select
PPP over Ethernet (PPPoE)
.
b
In the Encapsulation Mode field, select
LLC/SNAP - Bridging
.
Page 137 / 272
WAN Quick Setup
4036168 Rev B
115
c
Check the
VLAN Mux - Enable Multiple Protocols Over a Single PVC
check box, if applicable.
d
In the PPP Username: field, enter the user name for the point-to-point
protocol.
e
In the PPP Password: field, enter the password for the point-to-point
protocol.
f
In the PPPoE Service Name: field, enter the name for the point-to-point over
Ethernet service.
g
In the VPI
field, enter the virtual path identifier (VPI). Values are: 0 to 65535.
h
In the VCI field, enter the virtual channel identifier (VCI). Values are: 0 to
65535.
i
In the Service Category
field, select
ABRI Without PCR
.
j
Check the
Enable Quality of Service
check box if applicable.
k
In the Authentication Method field, select
AUTO
.
l
Check
Enable NAT
.
m
Check the
Enable IGMP Multicast
check box, if applicable.
n
Check the
Enable WAN Service
check box.
7
Click
Save
to save your settings.
8
Click
Reboot
. This action reboots the residential gateway so that the WAN setup
configuration takes effect.
Configuring the WAN Interface (MER Broadband Type)
To configure a WAN interface for MAC Encapsulation Routing (MER) broadband
type, complete the following steps.
1
Click
Home Network
on the main screen. The Client Summary screen opens.
Page 138 / 272
Chapter 5
Home Network Configuration
116
4036168 Rev B
2
Click
WAN Setup.
The WAN Quick Setup screen opens.
Page 139 / 272
WAN Quick Setup
4036168 Rev B
117
3
Click
Add
to add a new WAN interface, or click
Edit
to modify an existing WAN
interface.
4
In the Broadband Type field, enter
DSL
.
5
In the DSL Mode field, select
ATM
. More fields populate on the screen.
Page 140 / 272
Chapter 5
Home Network Configuration
118
4036168 Rev B
6
Complete the following fields on the screen as follows:
Note
:
This configuration is an example of a specific setting for the residential
gateway. Your values may differ depending upon your service provider.
a
In the Broadband Connect Type field, select
MAC Encapsulation Routing
(MER)
.
b
In the Encapsulation Mode field, select
LLC/SNAP - Bridging
.
c
Select the
VLAN Mux - Enable Multiple Protocols Over a Single PVC
check
box, if applicable.
d
In the VLAN ID[0-4095]: field, enter an ID for the VLAN. Values are: 0 to
4095.
e
In the VPI field, enter the virtual path identifier (VPI). Values are: 0 to 65535.
f
In the VCI field, enter the virtual channel identifier (VCI). Values are: 0 to
65535.
g
In the Service Category field, select
UBR Without PCR
.
h
Select the
Enable Quality of Service
check box, if applicable.
i
Select the
Obtain an IP address automatically
option.
j
Select the
Obtain default gateway automatically
option.
k
Select the
Obtain DNS server addresses automatically
option.
l
Select
Enable NAT
.
m
Select the
Enable IGMP Multicast
check box.
n
Select the
Enable WAN Service
check box.
7
Click
Save
. The system returns to the previous screen.
8
Click
Reboot
. This action reboots the residential gateway so that the WAN setup
configuration takes effect.

Rate

4 / 5 based on 1 vote.

Popular Cisco Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top