Page 121 / 272
Scroll up to view Page 116 - 120
DSL Settings
4036168 Rev B
99
Configuring DSL Slave Settings
To configure DSL slave settings for the residential gateway, complete the following
steps.
1
Click
DSL
on the main screen. The Summary screen opens by default.
2
Click the
Setting
tab. The DSL Slave Settings screen opens by default.
3
Do you want to automatically select the modulation?
If
yes
, make sure the
Automatic Select
check box is checked under Select the
modulation below field. Go to step 5.
If
no
, uncheck the
Automatic Select
check box. A list of modulation types
appears.
4
Under the Select the modulation below area on the screen, select the modulation
that you want to use. You can select one or all of the following modulations:
G.Dmt Enabled
G.lite Enabled
T1.413 Enabled
ADSL2 Enabled
AnnexL Enabled
ADSL2+ Enabled
AnnexM Enabled
Page 122 / 272
Chapter 4
DSL Configuration
100
4036168 Rev B
5
Under the Capability field, select the capability that you want to use from the
following options:
Bitswap Enable
SRA Enable
PhyR Enable
6
Click
Save/Apply
to save the settings.
DSL Advanced Settings
The DSL Advanced Settings screen allows you to select a test mode.
Path
:
DSL > Setting > DSL Slave Settings > Advanced Settings
Page 123 / 272
DSL Settings
4036168 Rev B
101
Configuring DSL Advanced Settings
To configure the DSL advanced settings, complete the following steps.
1
Click
DSL
on the main screen. The Summary screen opens by default.
2
Click the
Setting
tab. The DSL Slave Settings screen opens by default.
3
Click
Advanced Settings
. The DSL Advanced Settings screen opens.
Page 124 / 272
Chapter 4
DSL Configuration
102
4036168 Rev B
4
Select the test mode from the following options:
Normal
Reverb
Medley
No refrain
L3
5
Click
Apply
to configure and save the advanced settings.
DSL Master Settings
The DSL Master Settings screen allows you to choose the bonding bypass mode for
the RG, and to enable or disable PhyR as needed.
Path
:
DSL > Setting > DSL Master Settings
Page 125 / 272
DSL Settings
4036168 Rev B
103
Configuring DSL Master Settings
To configure DSL master settings for the residential gateway, complete the following
steps.
1
Click
DSL
on the main screen. The Summary screen opens by default.
2
Click the
Setting
tab. The DSL Slave Settings screen opens by default.
3
Click the
DSL Master Settings
tab to open the DSL Master Settings screen.
4
Define whether the RG will work on both pairs or a single pair.
Choose
Bonding Mode
if you want the RG to work on both pairs.
Choose
Non-bonding Mode
if you want the RG to work on a single pair.
5
Set or clear the
PhyR Enable
check box depending on whether you want PhyR
enabled.
6
Click
Save/Apply
to save the settings.
19216811.live