57
Permit configuration
from wired Internet
If enabled, allows access to configuration interface from network devices on the WAN
(Internet) side.
Permitted IP address
Displayed only if Internet-side configuration is enabled. Enter the IP address of a device
that is permitted to configure the AirStation remotely from the WAN (Internet) side.
Permitted Port
Displayed only if Internet-side configuration is enabled. Set a port number (1 - 65535) to
configure the AirStation from the WAN (Internet) side.
Limit network scanning
If checked, network scanning will not be able to determine which devices have network
settings GUIs available. You will have to open Settings for network devices directly.
NTP Functionality
Enable to use an NTP server.
NTP Server
Enter the name of the NTP server as a hostname, hostname with domain name, or IP
address. Up to 255 alphanumeric characters, hyphens (-), and underscores (_) may be
used. The default is
time.nist.gov
.
Update Interval
How often will the AirStation check the NTP server for the correct time? Intervals of 1 -
24 hours may be set. The default is 24 hours.
Local Date
You may manually set the date of the AirStation’s internal clock.
Local Time
You may manually set the time of the AirStation’s internal clock.
Time Zone
Specify the time zone (offset of greenwich mean time) of the AirStation’s internal clock.
DST (Daylight Saving
Time)
You may configure the AirStation to automatically use DST (daylight saving time). If
selected, the AirStation will automatically adjust the time at the beginning and end of
DST.
Syslog Settings
You may transfer the AirStation’s logs to a syslog server.
Admin - Syslog Settings
Transfer Logs
Enable to send logs to a syslog server.
Syslog Server
Identify the syslog server by hostname, hostname with domain name, or IP address. You
may enter up to 255 alphanumeric characters and hyphens (-).
Logs
Choose which logs will be transferred to the syslog server.
19216811.live