Page 41 / 114
Scroll up to view Page 36 - 40
41
Guest Accounts
Configure the AirStation’s guest accounts here.
Wireless - Guest Accounts (Router and Access Point Mode Only)
Guest Accounts
Enable or disable the guest accounts.
Guest User
Authentication
This sets whether authentication is performed for guest users.
Guest Account LAN IP
Address
This sets the LAN-side IP address for the guest accounts.
Guest Account DHCP
Server
This sets whether IP addresses are automatically assigned for devices connected to the
guest accounts.
Permitted Access Time
Set the time frame for Internet access for the guest accounts.
SSID
This sets the SSID for the guest accounts.
Wireless Authentication
This sets whether wireless authentication is performed for the guest accounts.
Wireless Encryption
This sets the wireless encryption system for the guest accounts.
WPA-PSK(Pre-shared
Key)
This sets the wireless encryption key for the guest accounts.
Key Renewal Interval
Set the update interval for the encryption key for the guest accounts.
Edit Guests
Click to register a user to use the guest accounts.
Username
Enter a name for the guest user.
Password
Enter a password for the guest user.
Page 42 / 114
42
Wireless Bridge
Configure the AirStation’s wireless bridge here.
Wireless - Wireless Bridge (Wireless Bridge Mode Only)
Wireless Bridge Status
Displays wireless bridge status.
SSID
Displays the master’s SSID.
Security
Displays the type of security used by connection with the master.
Select 5 GHz or 2.4 GHz
Set the priority for the connection with the master.
Repeater
When checked, the AirStation will use the wireless settings of the master device.
Physical AOSS Button
Uncheck
Enable
to disable AOSS and WPS.
Manual Settings
Click to search master devices. Select a master device and enter the encryption key.
PIN Code Method
Click
Start WPS by PIN
to issue PIN code and search master devices. Select a master
device and click
Run PIN
to start WPS. Register PIN code to the destination master device
within 2 minutes.
Pushbutton Method
Click
Start WPS by pushbutton
to start WPS. Press master device’s AOSS/WPS button
within 2 minutes.
Execute AOSS
Click
to start AOSS. Press master device’s AOSS/WPS button within 2 minutes.
Page 43 / 114
43
Firewall
Configure the AirStation’s firewall here.
Security - Firewall (Router Mode Only)
Basic Rules
Enable to use any of the quick filters. Preconfigured quick filters include:
Prohibit NBT and Microsoft-DS routing
Enabling this blocks communication using these protocols from the WAN side to the
LAN side or from the LAN side to the Internet. You can configure this with PPPoE if you
select
Use PPPoE client
or
Use IP Unnumbered
for the method of acquiring IP Address, or if
Easy Setup identified a PPPoE connection during setup.
Reject ident requests
Enabling this option will answer ident requests from the Internet side with
corresponding rejection packets. Enable this option if you experienced slow transfer
speeds for network applications such as email, FTP, and web browsing. If you have
configured transfer of ident requests to the LAN-side computer in the address
translation settings (DMZ or TCP port 113), then that setting has higher priority, and
overrides this setting.
Block ping from Internet
If this is enabled, the AirStation will not respond to pings from the Internet side. You
can configure this with PPPoE if you select
Use PPPoE client
or
Use IP Unnumbered
for the
method of acquiring an IP address, or if Easy Setup identified a PPPoE connection during
setup.
Page 44 / 114
44
IP Filter
Create and edit IP filters here.
Security - IP Filter (Router Mode Only)
Action
Specify how to process target packets.
Direction
Specify the transmission direction of target packets.
IP Address
Specify the sender’s IP address and receiver’s IP address of the target packets.
Protocol
Select a protocol for target transmission packet.
IP Filter
Display the list of IP filters which have been registered.
VPN Passthrough
Configure IPv6 passthrough, PPPoE passthrough, and PPTP passthrough here.
Security - VPN Passthrough (Router Mode Only)
IPv6 Passthrough
Enable to use IPv6 Passthrough for address translation.
PPPoE Passthrough
Enable to use PPPoE bridging. PPPoE bridging lets you automatically obtain an IP
address from your provider for your LAN-side computer using the PPPoE protocol
because PPPoE packets can pass between the Internet and LAN.
PPTP Passthrough
Enable to use PPTP passthrough for address translation.
Page 45 / 114
45
Port Forwarding
Configure port translation here.
Security - Port Forwarding (Router Mode Only)
Group
Specify a group name for a new rule to belong to. Select
New Group
and enter the new
group name in the Group Name field to create a new group. A group name can include
up to 16 alphanumeric characters.
Internet-side IP Address
Enter the Internet-side IP address (before translation) for the port translation table entry.
Protocol
Select the Internet-side protocol (before translation) for the port translation table entry.
LAN-side IP Address
Enter the LAN-side IP address (after translation) for the port translation table entry.
LAN-side Port
Select the LAN-side (after translation) port number (1 - 65535) for the port translation
table entry.
Forwarded Ports
Shows current entries in the port translation table.
19216811.live