Page 66 / 114
Scroll up to view Page 61 - 65
66
Adding an AirStation to an Existing Wireless Network as a
Client
In a network that already has a wireless access point, the AirStation can serve as a wireless client. It can connect
wirelessly to the existing wireless network and other devices can be connected to its Ethernet ports.
To configure the AirStation as a wireless client, navigate to
Wireless
>
Wireless Bridge
in Settings.
Under “Manual Connection”, click
Configure
.
Select your access point from the list of detected wireless devices. Select settings for “Wireless Authentication” and
“Encryption” to match the AP’s settings, then click
OK
. The AirStation is now connected as a wireless client, and Ethernet
devices connected to it can use the AP’s Internet connection.
Page 67 / 114
67
Chapter 4 - Utilities
How to Download Utilities
You can download utilities for your AirStation from Buffalo’s website.
WZR-1750DHP:
WZR-1166DHP:
Page 68 / 114
68
List of Utilities with Description of Each
AirStation Configuration Tool
You can enter the AirStation’s settings and change IP address with this tool.
Compatible with:
Windows 8, Windows 7, Windows Vista, Windows XP
OS X 10.8, 10.7, 10.6, 10.5, 10.4
Page 69 / 114
69
Network-USB Navigator
You can use a printer connected to the AirStation’s USB port via any computer in your network with this software.
Note:
Concurrent use by multiple computers is not supported.
Compatible with:
Windows 8, Windows 7, Windows Vista, Windows XP
OS X 10.8, 10.7, 10.6, 10.5, 10.4
Page 70 / 114
70
Client Manager
Use this software to let your Windows PC connect to the AirStation with AOSS.
Client Manager V supports Windows 8, Windows 7 and Windows Vista.
Client Manager 3 supports Windows XP.
Note:
If Client Manager 3 is installed on your computer, Wireless Zero Config is disabled. Uninstall Client Manager 3
to use Wireless Zero Config, or just use Client Manager 3 to connect to the AirStation.
Compatible with:
Windows 8, Windows 7, Windows Vista, Windows XP
19216811.live