1. Home
    2. /
  2. Manuals
    3. /
  3. Buffalo
    4. /
  4. WBMR-HP-GNV2
    5. /
  5. 7
Page 31 / 99 Scroll up to view Page 26 - 30
WBMR-HP-GNV2 User Manual
30
Chapter 4
Configuration
Parameter
Meaning
IP Address Update Period
Specifies the period to notify the dynamic DNS service provider of
the current IP address. For DynDNS, set it between 0 and 35 days.
For TZO, set it between 0 and 99 days. If 0 (zero) days is set, no
periodic update is performed.
Internet Side IP Address
The WAN-side IP address of the AirStation’s Internet port. This
address is sent to the dynamic DNS service provider.
Domain Name
The domain name assigned by the dynamic DNS Service provider.
The AirStation can be accessed from the Internet using this domain
name.
Status
Display the status of dynamic DNS service.
Page 32 / 99
Chapter 4
Configuration
WBMR-HP-GNV2 User Manual
31
Route
Configure the AirStation’s IP communication route.
Parameter
Meaning
Destination Address
Adds a destination IP address and subnet mask to a routing table.
Gateway
Adds a gateway address to a routing table.
Metric
The metric is the maximum number of router hops a packet may
take on the way to its destination address. Values between 1 and 15
may be entered. The default value is 15.
Routing Information
Manual entries will appear here after being added.
Page 33 / 99
WBMR-HP-GNV2 User Manual
32
Chapter 4
Configuration
Wireless Config
WPS
WPS Status and Settings.
Parameter
Meaning
WPS
Enable to use WPS automatic configuration.
External Registrar
Enable to accept the external configure requests from other WPS
devices.
Note:
External configure requests will not be accepted if AOSS is in use.
AirStation PIN
Displays the PIN code of the AirStation. Clicking [Generate PIN]
will generate a new PIN code. This code can be entered into other
wireless devices that support WPS.
Enrollee PIN
Enter the PIN code for the other wireless device and click [OK].
WPS status
Displays [configured] if all available wireless bands are
configured.
Displays [unconfigured] if at least one wireless band is
unconfigured.
Page 34 / 99
Chapter 4
Configuration
WBMR-HP-GNV2 User Manual
33
AOSS
AOSS Status and Settings.
Page 35 / 99
WBMR-HP-GNV2 User Manual
34
Chapter 4
Configuration
Parameter
Meaning
Initiates AOSS automatic wireless configuration. Click this, then
press or click the AOSS button on your AOSS-compatible wireless
client. Repeat for additional AOSS clients.
Click this button to disconnect AOSS connections.
Note: If AOSS connections are disconnected, the SSID and encryption keys
will be restored to their most recent settings before using AOSS.
Encryption Type of Exclusive SSID for
WEP
You may allow a separate SSID specifically for WEP connections. If
[disabled] is selected, then clients will not be able to connect with
WEP.
Advanced Encryption Level feature
Expands security method from TKIP to WPA/WPA2-PSK-mixed
mode.
Exclusive SSID for WEP
Set a separate SSID and network segment specifically for WEP
connections. Devices connected with WEP will not be able
to communicate with devices connected using AES/TKIP.
All
connected devices will be able to communicate with the internet.
AOSS Button on the AirStation Unit
Uncheck to disable the physical AOSS button on the AirStation.
Current Encryption Information
* AOSS Connection only
Displays the encryption type, SSID, an encryption key configured
by AOSS.
AOSS Client Information
*
* AOSS Connection only
Displays AOSS clients connected to the AirStation and information
of the devices which are wirelessly communicated.

Rate

4 / 5 based on 2 votes.

Popular Buffalo Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top