Chapter 4

Configuration

WBMR-HP-GNV2 User Manual

45

VPN Pass Through (Router Mode only)

Configure IPv6 pass through, PPPoE pass through, and PPTP pass through.

Parameter

Meaning

PPPoE Pass Through

Enable to use PPPoE bridge. Using PPPoE bridge lets you

automatically obtain an IP address from your provider using the

PPPoE protocol from your computer connected to the LAN side

because all PPPoE packets can pass through between the Internet

and LAN.

PPPTP Pass Through

Enable to use the PPTP Pass Through for address translation.

WBMR-HP-GNV2 User Manual

46

Chapter 4

Configuration

LAN Config

Port Forwarding (Router Mode only)

Configure port translation.

Parameter

Meaning

Group

Specify a group name for a new rule to belong to. Select [New

Group] and enter the new group name in the Group Name

field to create a new group. A group name can include up to 16

alphanumeric letters.

Protocol

Select the Internet side protocol (before translation) for the port

translation table entry.

Chapter 4

Configuration

WBMR-HP-GNV2 User Manual

47

Parameter

Meaning

LAN Side IP Address

Enter the LAN side IP address (after translation) for the port

translation table entry.

LAN Side Port

Select the LAN side (after translation) port number (1 - 65535) for

the port translation table entry.

Port Forwarding Registration

Information

Shows current entries in the port translation table.

WBMR-HP-GNV2 User Manual

48

Chapter 4

Configuration

DMZ (Router Mode only)

Configure a destination to transfer communication packets without a LAN side destination to.

Parameter

Meaning

IP Address of DMZ

Enter the IP address of the destination to which packets which are

not routed by a port translation table are forwarded.

Note: RIP protocol packets (UDP port number 520) will not be

forwarded.

UPnP (Router Mode only)

Configure UPnP (Universal Plug and Play).

Parameter

Meaning

UPnP

Enable or disable Universal Plug and Play (UPnP) functionality.

Chapter 4

Configuration

WBMR-HP-GNV2 User Manual

49

QoS (Router Mode only)

Configure the priority of packets sent to the Internet.

Parameter

Meaning

QoS for transmission to the Internet

Determine whether or not to prioritize packets sent to the Internet.

Check this box to enable QoS.

Upload bandwidth

Specify the upstream bandwidth in kbps from the AirStation to the

internet side.

Set the actual value for the upstream bandwidth.

Enable

Enable or disable this entry.

application name

Enter an application name. Names may use up to 32 alpha

numerical characters, double or single tick marks ("'), quotation

marks (“), and semicolons (;).

protocol

Select either TCP or UDP.