1. Home
    2. /
  2. Manuals
    3. /
  3. Buffalo
    4. /
  4. WBMR-HP-GNV2
    5. /
  5. 2
Page 6 / 99 Scroll up to view Page 1 - 5
WBMR-HP-GNV2 User Manual
5
Chapter 1 - Product Overview
Features
Supports IEEE802.11n and IEEE802.11b/g
With support for current Wireless-N, Wireless-G, and Wireless-B standards, the AirStation can transfer
data to and from all standard 2.4 GHz wireless clients.
Dual speed mode
Dual speed mode makes wireless transmission faster by using 2 channels, allowing 150 Mbps data
transmission.
Support AOSS and WPS
Both AOSS (AirStation One-touch Secure System) and WPS (Wi-Fi Protected Setup) are supported.
These automatic connection standards make connection with compatible wireless devices easier.
Security Features
The AirStation is equipped with following security features:
• AOSS
• WPS
• WPA-PSK (TKIP/AES)
• WPA2-PSK(TKIP/AES)
• WPA/WPA2 mixed PSK
• WEP(128-bit and 64-bit)
• Privacy Separator
• MAC address access restriction
• Deny Any Connection/SSID stealth feature
• Setting screen with password
• Firewall feature with easy rules
Automatic Channel Selection
Monitors wireless interference and automatically assigns the clearest, best channel.
Initialization
To restore settings back to the factory defaults, hold down the Reset button on the bottom of the
unit.
Browser Based Administration
This unit can be easily configured from a web browser on your computer.
Page 7 / 99
WBMR-HP-GNV2 User Manual
6
Chapter 1
Product Overview
Air Navigator CD Requirements
The AirStation wireless router and access point works with most wired and wireless devices.
However, the automatic installation program on the CD requires a connected Windows 7, Vista or
XP computer to run. If you use the AirStation with a different operating system, you will have to
configure your network settings manually from a browser window.
150 Mbps High Speed Mode
150 Mbps is the link speed when using Wireless-N mode. It represents actual wireless data speeds,
including overhead. Because the overhead is not available for user data transfer, usable wireless
throughput will be substantially slower.
Package Contents
The following items are included in your AirStation package. If any of the items are missing, please
contact your vender.
• WBMR-HP-GNV2
..........................................................................................................................
1
• Detachable antenna
...................................................................................................................
1
• AC adapter
.....................................................................................................................................
1
• Stand for vertical/horizontal/wall-mounting
....................................................................
1
• Screws for wall-mounting
........................................................................................................
2
• LAN cable
.......................................................................................................................................
1
• DSL cable
........................................................................................................................................
1
• Air Navigator CD
..........................................................................................................................
1
• Quick Setup Guide
......................................................................................................................
1
Page 8 / 99
1
3
2
5
6
4
7
8
9
Chapter 1
Product Overview
WBMR-HP-GNV2 User Manual
7
Hardware Overview
Front Panel LEDs / Back Panel
1
Power LED
On (Green) :
The AC adapter is connected.
Off (Green) :
The AC adapter is not connected.
Shows AirStation status.
2 blinks (Red)
*1
:
Flash ROM error.
3 blinks (Red)
*1
:
Wired Ethernet LAN error.
4 blinks (Red)
*1
:
Wireless LAN error.
5 blinks (Red)
*1
:
Network error.
9 blinks (Red)
*1
:
System error.
Continuously
blinking (Red)
*2
:
Updating firmware, saving settings, or initializing settings.
Page 9 / 99
WBMR-HP-GNV2 User Manual
8
Chapter 1
Product Overview
*1
Turn off AirStation first, wait for a few seconds, then turn it back on.
*2
If the Power LED keeps blinking, do not turn off the AirStation nor unplug its power
cable.
2
Security LED (Amber)
Indicates security status.
Off :
AOSS or Encryption is not set.
On :
AOSS/WPS activated; accessed to exchange security keys.
Encryption has been set.
2 blinks :
The unit is waiting for an AOSS or WPS security key.
Blinking :
AOSS/WPS error; failed to exchange security keys.
Note :
The Security LED is lit if an encryption key has been set.
3
Wireless LED (Green)
Indicates wireless LAN status.
On :
Wireless LAN is transmitting.
Off :
Wireless LAN is not active.
4
DSL LED (Green)
Indicates DSL status.
On :
The DSL port is connected.
5
Internet LED
Indicates Internet status.
On (Green) :
Connected to Internet
Blinking (Green) :
Communicating over Internet
On (Red) :
Not connected to Internet
Off :
Operating in bridge mode
6
DC Connector
Connect the included AC adapter here.
7
LAN LED (Green)
On :
An Ethernet device is connected.
Blinking :
An Ethernet device is communicating.
8
LAN Port
Connect your computer, hub, or other Ethernet devices to these ports. This switching hub
supports 10 Mbps, 100 Mbps connections.
9
DSL Port
Connect your ADSL line to this port.
Page 10 / 99
10
11
Chapter 1
Product Overview
WBMR-HP-GNV2 User Manual
9
Top
10
AOSS Button
To initiate AOSS, hold down this button until the Security LED flashes
(about 1 second).
Then, push or click the AOSS button on your wireless
client device to complete the connection. Both devices must be powered
on for this to work.
11
Antenna connector
Screw on the antenna here.

Rate

4 / 5 based on 2 votes.

Popular Buffalo Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top