Billion BiPAC-7800N Router Manual PDF (Setup & Configuration Guide)

Page 111 / 166 Scroll up to view Page 106 - 110

Fixed IP Address (EWAN)

NAT:

The NAT (Network Address Translation) feature allows multiple users to access the Internet

through a single IP account by sharing the single IP address. If users on your LAN have their own

public IP addresses to access the Internet, NAT function can be disabled.

MAC Spooﬁng:

This option is required by some service Providers. You must ﬁll the MAC address

speciﬁed by your service provider when this information is required. The default setting is set to

disable.

IP Address:

Enter your ﬁxed IP address.

Netmask:

User can change it to others such as 255.255.255.128. Type the netmask assigned to

you by your ISP (if given)

Gateway:

Enter the IP address of the default gateway.

Obtain DNS:

Select this check box to activate DNS.

Primary DNS/ Secondary DNS:

Enter the IP addresses of the DNS servers. The DNS servers are

passed to the DHCP clients along with the IP address and the netmask.

VLAN Mux:

check whether to enable VLAN Mux function.

802.1Q VLAN ID:

It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN

ID identiﬁcation, tagged: 2-4095.

IPv6:

Check to enble the function.

IP/Preﬁx Length:

Enter IP Address and Preﬁx length.

107

Page 112 / 166

IPv6 Gateway:

Enter the IP address of the default IPv6 gateway.

Primary DNS / Secondary DNS:

Enter the IP addresses of the DNS servers. The DNS servers are

passed to the DHCP clients along with the IP address and the netmask.

Click Apply to conﬁrm the settings.

Pure Bridge (EWAN)

VLAN Mux:

check whether to enable VLAN Mux function.

802.1Q VLAN ID:

It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN

ID identiﬁcation, tagged: 2-4095.

Click Apply to conﬁrm the settings.

108

Page 113 / 166

VLAN MUX Setting

A Virtual LAN, commonly known as a VLAN, is a group of hosts with the common set of requirements

that communicate as if they were attached to the same broadcast domain, regardless of the physical

location. A VLAN has the same attributes as a physical LAN, but it allows for end stations to be

grouped together even if they are not located on the same network switch.

The most commonly used Virtual LAN is deﬁned by 802.1Q tagging protocol, which expended the

original Ethernet frame header to include VLAN ID (tag) and priority bits.With the support of network

equipments, multiple virtual networks can coexist over the same physical network.

VLAN MUX is a VLAN operation where a VLAN and the user group are one-to-one mapped,

a

VLAN can be an unique identiﬁcation for the user group.

Example: IPTV service achieved with VLAN

MUX

According to your ISP, while the devices in your ISP need VLAN ID information, then VLAN MUX is

required to be enabled.

Suppose you want router port

1

for IPTV application, port 2-4 for common application. You want to

separate

IPTV trafﬁc from common application trafﬁc, you can create two VLANs, thus, VLAN200,

for IPTV application, VLAN 100 for common use.

Step 1: Select

Conﬁguration

>

WAN

>

WAN Proﬁle

,

in Proﬁle Port ﬁeld, select

EWAN

. Set PPPoE

connection, enter the needed information. Enable VLAN MUX, set 802.1Q VLAN ID 100.

109

Page 114 / 166

Step 2:

Select

Pure Bridge

mode, Enable VLAN MUX, set 802.1Q VLAN ID 200, Click Add.

Step 3: Now go to

Conﬁguration

>

Advanced

>

VLAN

, start to set VLAN. Select Port Based VLAN

Type, set VLAN Group Name VLAN 200,

select port 1 to join in this VLAN group and link this VLAN

group to eth0.200 as follows.

Here you have ﬁnished your wanted conﬁguration. The port 2-4 and VLAN are automatically

perceived as VLAN 100. Thus, you only need to conﬁgure VLAN 200 for IPTV application, through

VLAN, you can separate the trafﬁc easily and have a wonderful video expericence.

110

Page 115 / 166

111

ADSL Mode

ADSL Mode:

There are 2 modes “Annex L” and ”Annex M” that user can select for this connection.

Modulator:

There are 5 modes “ADSL2”, ”ADSL2+”, “G.Lite:”, “T1.413” and “G.DMT” that user can

select for this connection.

SRA:

select whether to enable SRA feature. SRA, short for Seamless Rate Adaptation, is a

technology used to adapt the rate seamlessly without any inﬂuence to the working system, to assure

of the quality of the ADSL system.

PhyR:

An impulse noise protection technology to improve xDLS performance. It was based on your

service provider. You can check Upstream and Downstream to improve Upstream or Downstream

communication performace.

Click Apply to conﬁrm the change.

Rate

Popular Billion Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share