1. Home
    2. /
  2. Manuals
    3. /
  3. Billion
    4. /
  4. BiPAC-7800N
    5. /
  5. 22
Page 106 / 166 Scroll up to view Page 101 - 105
102
IPoA Connections (ADSL)
IP TV / VOD applications:
The predefined WAN settings for users. Users can adopt the appropriate
one base on need.
Description:
A given name for the connection.
VPI/VCI:
Enter the VPI and VCI information provided by your ISP.
Encap. method:
Select the encapsulation format. Select the one provided by your ISP.
NAT:
The NAT (Network Address Translation) feature allows multiple users to access the Internet
through a single ISP account by sharing a single IP address. If users on your LAN have their own
public IP addresses to access the Internet, NAT function can be disabled.
IP Address:
Enter your fixed IP address.
Netmask:
User can change it to other such as 255.255.255.128. Type the netmask assigned to you
by your ISP (if given).
Gateway:
Enter the IP address of the default gateway.
Obtain DNS Automatically:
Select this check box to activate DNS.
Primary DNS/ Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
Page 107 / 166
103
Pure Bridge Connections (ADSL)
IP TV / VOD applications:
The predefined WAN settings for users. Users can adopt the appropriate
one base on need.
Description:
A given name for the connection.
VPI/VCI:
Enter the VPI and VCI information provided by your ISP.
Encap. method:
Select the encapsulation format. Select the one provided by your ISP.
Page 108 / 166
104
WAN Profile – Main Port (EWAN)
Besides using ADSL to connect to the Internet, BiPAC 7800(N) EWAN port is also an alternative to
connect to Cable Modems, VDSL and fiber optic lines. This alternative provides users with faster
connection & flexibility to connect to the Internet.
PPPoE (EWAN)
Username:
Enter the username provided by your ISP. You can input up to 256 alphanumeric
characters (case sensitive).
Password:
Enter the password provided by your ISP. You can input up to 32 alphanumeric characters
(case sensitive).
Service Name:
This item is for identification purposes. If it is required, your ISP will provide you the
necessary information. Maximum input is 32 alphanumeric characters.
NAT:
The NAT (Network Address Translation) feature allows multiple users to access the Internet
through a single IP account by sharing the single IP address. If users on your LAN have their own
public IP addresses to access the Internet, NAT function can be disabled.
IP (0.0.0.0.Auto):
Enter your fixed IP address.
Auth. Protocol:
Default is Auto. Please consult your ISP on whether to use Chap, Pap or MSCHAP.
Obtain DNS Automatically:
Select this check box to activate DNS.
Primary DNS/ Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
Connection:
Click on
Always on
to establish a PPPoE session during start up and to automatically
re-establish the PPPoE session when disconnected by the ISP. You may uncheck the item to disable
this function.
Idle Timeout:
Auto-disconnect the
broadband firewall gateway
when there is no activity on the line
Page 109 / 166
for a predetermined period of time.
MTU:
Control the maximum Ethernet packet size your PC will send.
MAC Spoofing:
This option is required by some service Providers. You must fill the MAC address
specified by your service provider when this information is required. The default setting is set to
disable.
VLAN Mux:
check whether to enable VLAN Mux function.
802.1Q VLAN ID:
It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN
ID identification, tagged: 2-4095.
IPv6:
check to enable IPv6 service. Enter IPv6 Gateway address and set IPv6 DNS as same in IPv4
mode.
IPv6 Address:
type the IPv6 address from your ISP, or get it automatically. ” ::” means to obtain IPv6
address automatically.
Obtain IPv6 DNS:
check Automatic to obtain DNS automatically. If not, please type the concrete
ones in the Primary and Secondary fields.
Click Apply to confirm the settings.
105
Page 110 / 166
106
Obtain an IP Address Automatically (EWAN)
NAT:
The NAT (Network Address Translation) feature allows multiple users to access the Internet
through a single IP account by sharing the single IP address. If users on your LAN have their own
public IP addresses to access the Internet, NAT function can be disabled.
MAC Spoofing:
This option is required by some service Providers. You must fill the MAC address
specified by your service provider when this information is required. The default setting is set to
disable.
Obtain DNS:
Select this check box to activate DNS.
Primary DNS/ Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
VLAN Mux:
check whether to enable VLAN Mux function.
802.1Q VLAN ID:
It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN
ID identification, tagged: 2-4095.
IPv6:
Check to enble the function
IPv6 Gateway:
Enter the IP address of the default IPv6 gateway.
Obtain IPv6 DNS:
check Automatic to obtain DNS automatically. If not, please type the concrete
ones in the Primary and Secondary fields.
Click Apply to confirm the settings.

Rate

4.5 / 5 based on 2 votes.

Popular Billion Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top