Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router

Chapter 4: Configuration

52

5. Now to make sure that the setup is correctly done, cross check to see if the SSID and the security

setting of the registrar setting match with the parameters found on both Wireless Configuration and

Wireless Security Configuration page.

Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router

Chapter 4: Configuration

53

Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router

Chapter 4: Configuration

54

PBC Method:

1. Press the PBC button of the AP.

2. Launch the wireless client’s WPS Utility (eg. Ralink Utility). Set the Config Mode as Enrollee. Then

press the WPS button and choose the correct AP (eg. wlan-ap) from the WPS AP List section before

pressing the PBC button to run the scan.

Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router

Chapter 4: Configuration

55

3. When the PBC button is pushed, a wireless communication will be established between your router

and the PC. The client’s SSID and security setting will now be configured to match the SSID and security

setting of the router.

Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router

Chapter 4: Configuration

56

Wi-Fi Network Setup with Windows Vista WCN:

1. Jot down the AP PIN from the Web (eg. 25879810).

2. In your Vista operating system, access the Control Panel page, then select Network and Internet >

View Network Computers and Devices. Double click on the router icon and enter the AP PIN in the

column provided then press Next.

3. Enter the AP SSID then click Next.