Page 51 / 165
Scroll up to view Page 46 - 50
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
47
WPS
WPS (WiFi Protected Setup) feature is a standard protocol created by Wi-Fi Alliance. This feature greatly
simplifies the steps needed to create a Wi-Fi network for a residential or an office setting. WPS supports 2
types of configuration methods which are commonly known among consumers:
PIN Method
&
PBC
Method
.
Page 52 / 165
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
48
Wi-Fi Network Setup
PIN Method: Configure AP as Registrar
1. Jot down the client’s Pin (e.g. 16837546).
2. Enter the Enrollee’s PIN number and then press Start.
3. Launch the wireless client’s WPS utility (eg. Ralink Utility). Set the Configure Mode as Enrollee, press
the WPS button on the top bar, select the AP (eg. wlan-ap) from the WPS AP List column.Then press the
PIN button located on the middle left of the page to run the scan.
Page 53 / 165
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
49
4. The client’s SSID and security setting will now be configured to match the SSID and security
setting of the registrar.
Page 54 / 165
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
50
PIN Method: Configure AP as Enrollee
1. In the WPS configuration page, change the Role to Enrollee. Then press Start.
2. Jot down the WPS PIN (e.g. 25879810).
3. Launch the wireless client’s WPS utility (e.g. Ralink Utility). Set the Config Mode as Registrar. Enter the
PIN number in the PIN Code column then choose the correct AP (eg. wlan-ap) from the WPS AP List
section before pressing the PIN button to run the scan.
4. The router’s (AP’s) SSID and security setting will now be configured to match the SSID and security
Page 55 / 165
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
51
setting of the registrar.
19216811.live