1. Home
    2. /
  2. Manuals
    3. /
  3. Billion
    4. /
  4. BiPAC-7300GX
    5. /
  5. 23
Page 111 / 126 Scroll up to view Page 106 - 110
110
5.3.8.3 Device Management
The Device Management advanced configuration settings allow you to control your router’s
security options and device monitoring features.
Embedded Web Server:
HTTP Port:
The port number of the router’s embedded web server (for web-based
configuration uses. The default value is the standard HTTP port, 80. You may specify an
alternative if, for example, you are running a web server on a PC within your LAN.
For Example:
User A changes HTTP port number to
100
, specifies their own IP address of
192.168.1.55
, and sets the logout time to be
100
minutes.
The router only allows User A
access from the IP address
192.168.1.55
to logon to the Web GUI by typing:
in their web browser. After 100 minutes, the device automatically
logs out User A.
Universal Plug and Play (UPnP):
UPnP offers peer-to-peer network connectivity for PCs and other network devices, along
with control and data transfer between devices. UPnP offers many advantages for users
running NAT routers through UPnP NAT Traversal, and on supported systems makes tasks
such as port forwarding much easier by letting the application control the required settings,
removing the need for the user to control advanced configuration of their device.
Both the user’s Operating System and the relevant application must support UPnP in
addition to the router. Windows XP and Windows Me natively support UPnP (when the
component is installed), and Windows 98 users may install the Internet Connection Sharing
client from Windows XP in order to support UPnP. Windows 2000 does not support UPnP.
Page 112 / 126
111
Disable:
Check to disable the router’s UPnP functionality.
Enable:
Check to enable the router’s UPnP functionality.
UPnP Port:
The Default setting is 2800. It is highly recommended you use this port
value. If this value conflicts with other ports already in use you may wish to change the port.
Installing UPnP in Windows Example
Follow the steps below to install the UPnP in Windows Me.
Step 1:
Click Start and Control Panel. Double-click Add/Remove Programs.
Step 2:
Click on the Windows Setup tab and select Communication in the Components
selection box. Click Details.
Step 3:
In the Communications window, select the Universal Plug and Play check box in
the Components selection box.
Page 113 / 126
112
Step 4:
Click OK to go back to the Add/Remove Programs Properties window. Click Next.
Step 5:
Restart the computer when prompted.
Follow the steps below to install the UPnP in Windows XP.
Step 1:
Click Start and Control Panel.
Step 2:
Double-click Network Connections.
Step 3:
In the Network Connections window, click Advanced in the main menu and select
Optional Networking Components ….
The Windows Optional Networking Components Wizard window displays.
Step 4:
Select Networking Service in the Components selection box and click Details.
Page 114 / 126
113
Step 5:
In the Networking Services window, select the Universal Plug and Play check box.
Step 6:
Click
OK
to go back to the Windows Optional Networking Component Wizard
window and click
Next
.
Page 115 / 126
114
Auto-discover Your UPnP-enabled Network Device
Step 1:
Click start and Control Panel. Double-click Network Connections. An icon displays
under Internet Gateway.
Step 2:
Right-click the icon and select Properties.
Step 3:
In the Internet Connection Properties window, click Settings to see the port
mappings that were automatically created.

Rate

3.5 / 5 based on 2 votes.

Popular Billion Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top