Page 106 / 126
Scroll up to view Page 101 - 105
105
5.3.7 Time Schedule
The Time Schedule supports up to 16 time slots which helps you to manage your Internet
connection.
In each time profile, you may schedule specific day(s) i.e. Monday through
Sunday to restrict or allowing the usage of the Internet by users or applications.
This Time Schedule correlates closely with router’s time, since router does not have a real
time clock on board; it uses the Simple Network Time Protocol (SNTP) to get the current
time from an SNTP server from the Internet. Refer to
Time Zone
for details.
You router
time should correspond with your local time.
If the time is not set correctly, your Time
Schedule will not function properly.
Name:
A user-define description to identify this time portfolio.
Day:
The default is set from Sunday through Saturday. You may specify the days for the
schedule to be applied.
Page 107 / 126
106
Start Time:
The default is set at 8:00 AM.
You may specify the start time of the
schedule.
End Time:
The default is set at 18:00 (6:00PM). You may specify the end time of the
schedule. Select the
Apply
button to apply your changes.
Page 108 / 126
107
5.3.8 Advanced
Configuration options within the
Advanced
section are for users who wish to take
advantage of the more advanced features of the router. Users who do not understand the
features should not attempt to reconfigure their router, unless advised to do so by support
staff.
There are seven items within the
Advanced
section:
Static Route, Dynamic DNS, Device
Management, IGMP, WAN IP Change Alert
,
SNMP Access Control
and
Remote
Access.
Page 109 / 126
108
5.3.8.1 Static Route
Destination:
The destination subnet IP address.
Netmask:
Subnet mask of the destination IP addresses based on above destination.
Gateway:
The gateway IP address to which packets are forwarded.
Interface:
Select the interface through which packets are forwarded.
Cost:
Represents the cost of transmission for routing purposes. The number need not
be precise, but it must be between 0 and 65535.
5.3.8.2 Dynamic DNS
The Dynamic DNS function lets you alias a dynamic IP address to a static hostname, so if
your ISP does not assign you a static IP address you can still use a domain name. This is
especially useful for hosting servers via your ADSL connection, so that anyone wishing to
connect to you may use your domain name, rather than having to use your dynamic IP
address, which changes from time to time. This dynamic IP address is the WAN IP address
of the router, which is assigned to you by your ISP.
You first need to register and establish an account with the Dynamic DNS provider using
Page 110 / 126
109
There are more than 5 DDNS services supported.
Disable:
Check to disable the Dynamic DNS function.
Enable:
Check to enable the Dynamic DNS function. The fields following are activated
and required.
Dynamic DNS Server:
Select the DDNS service you have established an account with.
Wildcard:
Select this check box to enable the DYNDNS Wildcard.
Domain Name, Username and Password:
Enter your registered domain name and
your username and password for this service.
Period:
Set the time period between updates, for the Router to exchange information
with the DDNS server. In addition to updating periodically as per your settings, the router
will perform an update when your dynamic IP address changes.
19216811.live