Page 151 / 308
Scroll up to view Page 146 - 150
146
SMS Alert
SMS, Short Message Service, is to inform clients the information clients subscribe. The BiPAC
7800VDP(O)X offers SMS alert sending clients alert messages when a WAN IP change is detected.
Recipient’s Number (WAN IP Change Alert):
Enter the Recipient’s number that will receive the
alert message once a WAN IP change has been detected.
Page 152 / 308
147
Configure Log
Log:
Enable or disable this function.
Log level:
Select your log level. The log level allows you to configure which types of events are
logged. There are eight log levels from high to low are displayed below:
Emergency
= system is unusable
Alert
= action must be taken immediately
Critical
= critical conditions
Error
= error conditions
Warning
= warning conditions
Notice
= normal but significant conditions
Informational
= information events
Debugging
= debug-level messages
The gateway records all log events at the chosen level and above. For instance, if you set the log
level to Critical, all critical, alert, and emergency events are logged, but none of the others are
recorded
Display Level:
Display the log according to the level you set when you view system log. Once you
set the display level, the logs of the same or higher priority will be displayed.
Mode:
Select the mode the system log adopted. Three modes: local, Remote and Both.
Local
: Select this mode to store the logs in the router’s local memory.
Remote
: Select this mode to send the log information to a remote log server. Then you must
assign the remote log server and port, 514 is often used.
Both
: Logs stored adopting above two ways.
Click
Apply
to save your settings.
Page 153 / 308
148
USB
Storage here refers to network sharing in the network environment, USB devices act as the storage
carrier for DLNA, common file sharing.
Storage Device Info
This part provides users direct access to the storage information like the total volume, the used and
the remaining capacity of the device.
Volume Name:
Display the storage volume name
FileSystem:
Display the storage device’s file system format, well-known is FAT.
Total Space:
Display the total space of the storage, with unit MB.
Used Space:
Display the remaining space of each partition, unit MB.
Unmount:
Click
Unmount
button if you want to uninstall the USB device. Please
Note
that first click
Unmount
before you uninstall your USB storage.
Page 154 / 308
149
User Account
Users here can add user accounts for access to the storage, in this way users can access the
network sharing storage with the specified account, and again protect their own data.
Default user admin.
Click
Add
button, enter the user account-adding page:
Username:
user-defined name, but simpler and more convenient to remember would be favorable.
Password:
Set the password.
Confirm Password:
Reset the password for confirmation.
Volume Name:
Select Volume name, as to create access to the volume of the specified partition of
the storage.
For example, a user
test
is setup behind the usb1_1.
Page 155 / 308
150
Accessing mechanism of Storage:
In your computer, Click
Start
>
Run
, enter
\\192.168.1.254
19216811.live