1. Home
    2. /
  2. Manuals
    3. /
  3. Billion
    4. /
  4. BiPAC 7800VDOX
    5. /
  5. 30
Page 146 / 308 Scroll up to view Page 141 - 145
141
System
Internet Time
The router does not have a real time clock on board; instead, it uses the Network Time Protocol
(NTP) to get the most current time from an NTP server.
NTP is a protocol for synchronization of computers. It can enable computers synchronize to the NTP
server or clock source with a high accuracy.
Choose the NTP time server from the drop-down menu, if you prefer to specify an NTP server other
than those in the drop-down list, simply enter its IP address in their appropriate blanks provided as
shown above. Your ISP may also provide an SNTP server for you to use.
Choose your local time zone from the drop-down menu. After a successful connection to the Internet,
the router will retrieve the correct local time from the NTP server you have specified. If you prefer to
specify an NTP server other than those in the drop-down list, simply enter its IP address in their
appropriate blanks provided as shown above. Your ISP may also provide an NTP server for you to
use.
Click
Apply
to apply your settings.
Page 147 / 308
142
Firmware Upgrade
Software upgrading lets you experience new and integral functions of your router.
Restart device with:
Factory Default Settings:
Restart the device with factory default settings automatically when
finishing upgrading.
Current Settings:
Restart the device with the current settings automatically when finishing
upgrading.
Your router’s “firmware” is the software that allows it to operate and provides all its functionality.
Think of your router as a dedicated computer, and the firmware as the software it runs. Over time
this software may be improved and revised, and your router allows you to upgrade the software it
runs to take advantage of these changes.
Clicking on
Browse
will allow you to select the new firmware image file you have downloaded to
your PC. Once the correct file is selected, click
Upgrade
to update the firmware in your router.
Page 148 / 308
143
Backup / Update
These functions allow you to save and backup your router’s current settings to a file on your PC, or
to restore from a previously saved backup. This is useful if you wish to experiment with different
settings, knowing that you have a backup handy in the case of any mistakes. It is advisable to
backup your router’s settings before making any significant changes to your router’s configuration.
Click
Backup Settings
, a window appears, click save , then browse the location where you want to
save the backup file.
Click
Browse
and browse to the location where your backup file is saved, the click
Open.
Then in
the above page, click
Update Settings
, the following process indicating screen will appear. Let it
update to 100%, it will automatically turn to the Device Info page.
Page 149 / 308
144
Access Control
Access Control is used to prevent unauthorized access to the router configuration page. Here you
can change the login user password. Three user levels are provided here. Each user level there’s a
default provided user. You must access the router with the appropriate username and password.
Here the corresponding passwords are allowed to change.
Level:
select which level you want to change password to. There are three default levels.
Administrator:
the root user, corresponding default username and password are admin and
admin respectively.
Remote:
username for the remote user to login, corresponding default username and
password are support and support respectively.
Local:
username for the general user, when logon to the web page, only lit items would be
listed for common user, corresponding default username password are user and user
respectively.
Username:
the default username for each user level.
Old Password:
Enter the old password.
New Password:
Enter the new password.
Confirm Password:
Enter again the new password to confirm.
Note:
By default the accounts of
Remote
and
Local
are disabled, please click
Valid
check-box to
activate the accounts.
Click
Apply
to apply your new settings.
Page 150 / 308
145
Mail Alert
Mail alert is designed to keep system administrator or other relevant personnel alerted of any
unexpected events that might have occurred to the network computers or server for monitoring
efficiency. With this alert system, appropriate solutions may be tackled to fix problems that may have
arisen so that the server can be properly maintained.
WAN Port:
Mail Alert feature can be applicable to every WAN mode: Ethernet
，
DSL and 3G/LTE.
Select the port you want to use Mail Alert.
For example DSL, then when the WAN connection is in DSL mode and when there is any
unexpected event, the alert message will be sent to your specified E-mail.
Apply all settings to:
check whether you want to have a copy of the settings to apply to other WAN
port, suppose the above Main port is DSL, then if you enable this function, then Ethernet port will
have the same configuration.
SMTP Server:
Enter the SMTP server that you would like to use for sending emails.
Username:
Enter the username of your email account to be used by the SMTP server.
Password:
Enter the password of your email account.
Sender’s Email:
Enter your email address.
SSL:
check to whether to enable SSL encryption feature.
Port:
the port, default is 25.
Account Test:
Press this button to test the connectivity and feasibility to your sender’s e-mail.
Recipient’s Email (WAN IP Change Alert):
Enter the email address that will receive the alert
message once a WAN IP change has been detected.
Recipient’s Email (3G/LTE Usage Allowance):
Enter the email address that will receive the alert
message once
t
he 3G over Usage Allowance occurs.

Rate

4.5 / 5 based on 2 votes.

Popular Billion Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top