Page 71 / 139
Scroll up to view Page 66 - 70
68
PBC Method:
1.
Press the PBC button of the AP.
2.
Launch the wireless client’s WPS Utility (eg. Ralink Utility). Set the Config Mode as Enrollee.
Then press the WPS button and choose the correct AP (eg. wlan-ap) from the WPS AP List
section before pressing the PBC button to run the scan.
Page 72 / 139
69
3.
When the PBC button is pushed, a wireless communication will be established between your
router and the PC. The client’s SSID and security setting will now be configured to match the SSID
and security setting of the router.
Page 73 / 139
70
Wi-Fi Network Setup with Windows Vista WCN:
1.
Jot down the AP PIN from the Web (eg. 25879810).
2.
Access the Wireless configuration of the web GUI. Set the WPS State to Unconfigured then click
Apply.
Page 74 / 139
71
3.
In your Vista operating system, access the Control Panel page, then select Network and Internet
> View Network Computers and Devices. Double click on the BiPAC 7300W icon and enter the
AP PIN in the column provided then press Next.
Page 75 / 139
72
4.
Enter the AP SSID then click Next.
5.
Enter the Passphrase then click Next.
19216811.live