43

5.1.1 ADSL Status

DSP Firmware Version:

DSP code version

DMT Status:

Current DMT Status

Operational Mode:

To show the state when user select “AUTO” on connect mode. Click

the link, the following will appear.

~

ADSL Mode:

There are four modes “

Open Annex Type and Follow DSLAM’s

Setting

”, ”

Annex A

”, ”

Annex L

”,

”

Annex M

” and

“Annex J”

that user can select for this

connection.

~

Modulator:

There are seven modes “

AUTO

”, ”

ADSL

Multimode

”,”

ADSL2

”, ”

ADSL2+

”,”

G.Lite

”, “

T1.413

” and “

G.DMT

” that user can select for

this connection.

Upstream:

Upstream rate.

Downstream:

Downstream rate.

SNR Margin (Upstream):

This is noise margin in upstream.

44

SNR Margin (Downstream):

This is noise margin in downstream.

Line Attenuation (Upstream):

This is attenuation of signal in upstream.

Line Attenuation (Downstream):

This is attenuation of signal in downstream.

Refresh:

Press this button to get the latest statistics.

5.1.2 ARP Table

This section displays the router’s ARP (Address Resolution Protocol) Table, which shows

the mapping of Internet (IP) addresses to Ethernet (MAC) addresses. This is useful as a

quick way of determining the MAC address of the network interface of your PCs to use with

the router’s

Firewall – MAC Address Filter

function. See the Firewall section of this manual

for more information on this feature.

IP Address:

It is IP Address of internal host that join this network.

MAC Address:

The MAC address of internal host.

Interface:

The interface name (on the router) that this IP address connects to.

Static ARP:

Shows the status of static ARP.

5.1.3 DHCP Table

IP Address:

The current corresponding DHCP-assigned dynamic IP address of the

device.

MAC Address:

The MAC Address of internal DHCP client host.

Client Host Name:

The Host Name of internal DHCP client.

Register Information:

Register time information.

45

5.1.4 System Log

Display system logs accumulated up to the present time. You can trace historical information

with this function.

46

5.1.5 Firewall Log

Firewall Log displays log information of any unexpected action with your firewall settings.

This page displays the router’s Firewall Log entries. The log shows log entries when you

have enabled Intrusion Detection or Block WAN PING in the

Configuration – Firewall

section of the interface. Please see the

Firewall

section of this manual for more details on

how to enable Firewall logging.

5.1.6 UPnP Portmap

The section lists all port-mapping established using UPnP (Universal Plug and Play). Please

see the Advanced section of this manual for more details on UPnP and the router’s UPnP

configuration options.

Name:

the description of this application.

Protocol:

the protocol used by UpnP NAT Mapping.

External Port:

the external service port transformed by the mapping

，

thus the remote

port or the port in the WAN wanting to connect in.

Internal Port:

the internal service port.

IP Address:

the internal host IP address.

47

5.2 Quick Start

ADSL

Connect mode:

ADSL

Protocol:

The current ATM protocol in the device

VPI / VCI:

The current value of VPI / VCI in the device

IP address:

To show current value of IP address in the device.

EWAN

Click on

Continue

to choose the Protocol to connect with EWAN or click

Jump to Wireless

Setting

to use Protocol: Obtain an IP Address Automatically to connect and setup wireless

settings at the same time.