1. Home
    2. /
  2. Manuals
    3. /
  3. Billion
    4. /
  4. 810VGTX
    5. /
  5. 5
Page 21 / 130 Scroll up to view Page 16 - 20
Billion 810VGTX Router
Page | 20
Status:
The current status of the 3G card.
Signal Strength:
The signal strength bar indicates the current 3G signal strength.
Network Name:
The network name that the device is connected to.
Card Name:
The name of the 3G card.
Card Firmware:
The current firmware of the 3G card.
Current TX Bytes / Packets:
The statistics of data transmission in bytes / packets during a call.
Current RX Bytes / Packets:
The statistics of data received in bytes / packets during a call.
Total TX Bytes / Packets:
The statistics of total data transmission in bytes / packets since system ready.
Total RX Bytes / Packets:
The statistics of total data received in bytes / packets since system ready.
ARP Table
This section displays the router ARP (Address Resolution Protocol) Table which shows the mapping of Internet (IP)
addresses to Ethernet (MAC) addresses. This is a quick way of determining the MAC address of the network interface of
your PCs that use the Firewall – MAC Address Filter function. See the Firewall section of this manual for more
information on this feature.
IP Address:
Shows a list of IP addresses of devices on your LAN (Local Area Network).
MAC Address:
Shows the MAC (Media Access Control) addresses of each device on your LAN.
Interface:
Shows the interface name (on the router) that this IP Address connects to.
Static:
Static status of the ARP table entry:
“
no
” for dynamically-generated ARP table entries.
“
yes
” for static ARP table entries added by the user.
Page 22 / 130
Billion 810VGTX Router
Page | 21
DHCP Table
Leased:
Shows the information of the DHCP assigned IP addresses.
Expired:
Shows the information of all expired IP addresses.
Permanent:
Shows the fixed host mapping information.
Leased Table
IP Address:
Shows the IP address that is assigned to each client.
MAC Address:
Shows the MAC address of each client.
Client Host Name:
Shows the Host Name (Computer Name) of the client.
Expiry:
Shows the current lease time of each client.
Routing Table
Routing Table
Valid:
A check mark indicates a successful routing status.
Destination:
Shows the IP address of the destination network.
Netmask:
Shows the destination Netmask address.
Gateway/Interface:
Shows the IP address of the gateway or the existing interface that this route will use.
Cost:
The number of hops counted as the cost of the route.
Page 23 / 130
Billion 810VGTX Router
Page | 22
RIP Routing Table
Destination:
Shows the IP address of the destination network.
Netmask:
Shows the destination Netmask address.
Gateway:
Shows the IP address of the gateway that this route will use.
Cost:
The number of hops counted as the cost of the route.
NAT Sessions
This section lists all the current NAT sessions between external (WAN) and internal (LAN) interface.
UPnP Portmap
This section lists all the established port-mapping using UPnP (Universal Plug and Play). See the Advanced
section of this manual for more details on UPnP and the router UPnP configuration options.
Page 24 / 130
Billion 810VGTX Router
Page | 23
PPTP Status
This shows details of your configured PPTP VPN Connections.
Name:
Shows the name you assign to a particular PPTP connection in your VPN configuration.
Type:
Shows the type of connection (dial-in/dial-out).
Enable:
Shows whether the connection is currently enabled.
Active:
Shows whether the connection is currently active.
Tunnel Connected:
Shows whether the VPN Tunnel is currently connected.
Call Connected:
Shows whether the Call for this VPN entry is currently connected.
Encryption:
Shows the encryption type used for this VPN connection.
IPSec Status
This shows the details of your configured IPSec VPN Connections.
Name:
Shows the name you assign to a particular VPN entry.
Active:
Shows whether the VPN Connection is currently Active.
Connection State:
Shows the connection status of VPN.
Statistics:
Shows the statistics of your VPN Connection.
Local Subnet:
Shows the local IP Address or Subnet that is being used.
Remote Subnet:
Shows the Subnet of the remote site.
Remote Gateway:
Shows the Remote Gateway IP address.
SA: Shows the Security Association of this VPN entry.
Page 25 / 130
Billion 810VGTX Router
Page | 24
L2TP Status
This shows the details of your configured L2TP VPN Connections.
Name:
Shows the name you assign to a particular L2TP connection in your VPN configuration.
Type:
Shows the type of connection (dial-in/dial-out).
Enable:
Shows whether the connection is currently enabled.
Active:
Shows whether the connection is currently active.
Tunnel Connected:
Shows the current connection status of the VPN Tunnel.
Call Connected:
Shows the current connection status of a particular VPN entry call.
Encryption:
Shows the encryption type used for this VPN connection.
VoIP Status
This table shows the status of the phone ports when VoIP feature has been activated. It displays information such as
domain name, display name & phone number of the VoIP device.

Rate

3.5 / 5 based on 2 votes.

Popular Billion Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top