Page 21 / 117
Scroll up to view Page 16 - 20
3.4 LAN and WAN Port Addresses
The parameters of LAN and WAN ports are preset at the factory.
The default values are
shown below.
LAN Port
WAN Port
IP address
192.168.1.254
Subnet Mask
255.255.255.0
DHCP server function
Enabled
IP addresses for
distribution to PCs
100 IP addresses continuing from
192.168.1.100 through
192.168.1.199
The PPPoE function is
enabled
to
automatically get the
WAN port
configuration from the
ISP, but you have to
set the username and
password first.
3.5 Configuring with your Web Browser
Open your web browser, enter the IP address of your router, which by default is
192.168.1.254
, and click “
Go
”, a user name and password window prompt appears.
The
default username and password are “admin” and “admin”.
Congratulations! You have successfully logged on to your myGuard 7202(G) ADSL
Router!
19
Downloaded from
www.Manualslib.com
manuals search engine
Page 22 / 117
Chapter 4
Configuration
Once you have logged on to your myGuard 7202(G) ADSL Router via your web browser,
you can begin to set it up according to your requirements. On the configuration homepage,
the left navigation pane links you directly to the setup pages, which include:
Status
(ARP Table, Wireless Association, Routing Table, DHCP Table, System Log,
Security Log)
Quick Start
Configuration
(LAN, WAN, System, Firewall, QoS, Virtual Server and Advanced)
TrendMicro
(Security Setting and Parental Controls)
Save Config to FLASH
The following sections provide an overview of the settings available for configuring your
myGuard router by Billion.
20
Downloaded from
www.Manualslib.com
manuals search engine
Page 24 / 117
Device Information
Host Name:
Provide a name for the router for identification purposes. Host Name lets
you change the router name.
System Up-Time:
Records system up-time.
Current time:
Set the current time. See the Time Zone section for more information.
22
Downloaded from
www.Manualslib.com
manuals search engine
Page 25 / 117
Hardware Version:
Chipset version
Software Version:
Firmware version
LAN MAC Address:
The LAN MAC address
WAN MAC Address:
The WAN MAC address
Home URL:
Connects to the Home Website.
LAN
IP Address:
LAN port IP address.
Sub Net Mask:
LAN port IP subnet mask.
DHCP Server:
LAN port DHCP role - Server, Relay or None.
WAN
IP WAN:
Name of the WAN connection.
VPI/VCI:
Virtual Path Identifier and Virtual Channel Identifier
Connection:
Selects “Disconnected” or “Connected”
IP Address:
WAN port IP address.
Net mask:
WAN port IP subnet mask.
Gateway:
The IP address of the default gateway.
Port Status
：
User can look up for your connected
condition
23
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live