Page 16 / 117
Scroll up to view Page 11 - 15
Configuring a PC in Windows 2000
1.
Go to
Start / Settings / Control Panel
.
In the Control Panel, double-click on
Network
and Dial-up Connections
.
2.
Double-click
Local Area Connection
.
3.
In the
Local Area Connection Status
window click
Properties
.
4.
Select
Internet Protocol (TCP/IP)
and
click
Properties
.
5.
Select the
Obtain an IP address
automatically
and
the
Obtain DNS
server address automatically
radio
buttons.
6.
Click
OK
to finish the configuration.
14
Downloaded from
www.Manualslib.com
manuals search engine
Page 17 / 117
Configuring PC in Windows 98/Me
1.
Go to
Start / Settings / Control Panel
.
In the Control Panel, double-click on
Network
and choose the
Configuration
tab.
2.
Select
TCP/IP ->NE2000 Compatible
,
or the name of your Network Interface
Card (NIC) in your PC.
3.
Select the
Obtain an IP address
automatically
radio button.
4.
Then select the
DNS Configuration
tab.
5.
Select the
Disable DNS
radio button
and click
OK
to finish the configuration.
15
Downloaded from
www.Manualslib.com
manuals search engine
Page 18 / 117
Configuring PC in Windows NT4.0
1.
Go to
Start / Settings / Control Panel
. In
the Control Panel, double-click on
Network
and choose the
Protocols
tab.
2.
Select
TCP/IP Protocol
and click
Properties
.
3.
Select the
Obtain an IP address from a
DHCP server
radio button and click
OK
.
16
Downloaded from
www.Manualslib.com
manuals search engine
Page 19 / 117
3.2 Activating Trend Micro Security Services
Activate Trend Micro Security Services and receive enhanced protection for your PCs.
Available Services
Before Activation
After Activation
z
Security Scan
z
Vulnerability reports
60-day evaluation version
Unlimited use.
z
Virus Scan
z
Personal Firewall
z
Spyware Protection
z
Parental Controls
Not available.
60-day evaluation version with
option to purchase for
one-year use.
To activate Trend Micro Security Services, follow the steps below:
Step 1:
Register your Trend Micro account
Step 2:
Validate the Registration Email.
You will receive a Serial number for your 60-day
trial of Trend Micro Internet Security.
Step 3:
Install Trend Micro Internet Security (named TIS 11.35 Package).
*Important: you may download the software through the Internet or from the included CD in a
folder called Trend Micro Internet Security Software.
Refer to the
TMSS Quick Start Card
for quick setup information and check the Trend Micro
Internet Security user’s manual for more information.
17
Downloaded from
www.Manualslib.com
manuals search engine
Page 20 / 117
3.3 Factory Default Settings
Before configuring the myGuard 7202(G) router, you need to know the following default
settings.
Web Interface:
Username: admin
Password: admin
LAN Device IP Settings:
Subnet Mask: 255.255.255.0
ISP setting in WAN site:
PPPoE
DHCP Server:
DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100
3.3.1 Username and Password
The default username and password are “
admin
” and “
admin
” respectively.
Attention
To reset the router or to restore it to factory default settings press the
Reset button using the end of paper clip or other small pointed object.
1. To perform Failure recovery for a dead router:
Simply hold the Reset button when powering on the router and
download an application if necessary.
2. To perform recovery in case of a misplaced Password:
Hold the Reset button until the LEDs all turn Off, turn On and then turn
Off. The router performs configuration factory reset and the router
reboots. You can then access the router from the web GUI.
18
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live