1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. ME1004-R
    5. /
  5. 9
Page 41 / 98 Scroll up to view Page 36 - 40
37
2
1
3
4
5
6
section
Using the Web-Based Advanced User Interface
7
8
9
10
3. DHCP Server
The DHCP server function makes setting up a network very easy by
assigning IP addresses to each computer on the network automatically.
The default setting is “On”. The DHCP server can be turned OFF if
necessary; however, in order to do so you must manually set a static IP
address for each computer on your network. To turn off the DHCP server,
select “Off” and click “Apply Changes”.
4. IP Pool
The range of IP addresses set aside for dynamic assignment to the
computers on your network. The default is 2–100 (99 computers). If you
want to change this number, you can do so by entering a new starting
and ending IP address and clicking on “Apply Changes”. The DHCP
server can assign 100 IP addresses automatically. This means that
you cannot specify an IP address pool larger than 100 computers. For
example, starting at 50 means you have to end at 150 or lower so as not
to exceed the 100-client limit. The starting IP address must be lower in
number than the ending IP address.
5. Lease Time
The length of time the DHCP server will reserve the IP address for each
computer. We recommend that you leave the lease time set to “Forever”.
The default setting is “Forever”, meaning that any time a computer is
assigned an IP address by the DHCP server, the IP address will not
change for that particular computer. Setting lease times for shorter
intervals such as one day or one hour frees IP addresses after the
specified period of time. This also means that a particular computer’s
IP address may change over time. If you have set any of the other
advanced features of the Router such as DMZ or client IP filters, these
are dependent on the IP address. For this reason, you will not want the
IP address to change.
6. Local Domain Name
The default setting is “MyEssentials”. You can set a local domain name
(network name) for your network. There is no need to change this setting
unless you have a specific advanced need to do so. You can name the
network anything you want such as “MY NETWORK”.
Downloaded from
www.Manualslib.com
manuals search engine
Page 42 / 98
Using the Web-Based Advanced User Interface
38
Viewing the DHCP Client List Page
You can view a list of the computers (known as clients), which are
connected to your network. You are able to view the IP address
(1)
of
the computer, the host name
(2)
(if the computer has been assigned one),
and the MAC address
(3)
of the computer’s network interface card (NIC).
Pressing the “Refresh”
(4)
button will update the list. If there have been
any changes, the list will be updated.
(1)
(2)
(3)
(4)
Downloaded from
www.Manualslib.com
manuals search engine
Page 43 / 98
39
2
1
3
4
5
6
section
Using the Web-Based Advanced User Interface
7
8
9
10
Configuring the Wireless Network Settings
Clicking on the header of the “Wireless” tab will take you to the
“Wireless” header page. Under the “Wireless” tab, there are links
that allow you to make changes to the wireless network settings.
Downloaded from
www.Manualslib.com
manuals search engine
Page 44 / 98
Using the Web-Based Advanced User Interface
40
Changing the Wireless Network Name (SSID)
To identify your wireless network, a name called the SSID (Service Set
Identifier) is used. The default SSID of the Router is “MyEssentials”. You
can change this to anything you want to or you can leave it unchanged.
If there are other wireless networks operating in your area, you will want
to make sure that your SSID is unique (does not match that of another
wireless network in the area). To change the SSID, type in the SSID that
you want to use in the “SSID” field
(1)
and click “Apply Changes”
(2)
. The
change is immediate. If you make a change to the SSID, your wireless-
equipped computers may also need to be reconfigured to connect to your
new network name. Refer to the documentation of your wireless network
adapter for information on making this change.
(2)
(1)
Downloaded from
www.Manualslib.com
manuals search engine
Page 45 / 98
41
2
1
3
4
5
6
section
Using the Web-Based Advanced User Interface
7
8
9
10
Using the Wireless Mode Switch
Your Router can operate in three different wireless modes: “g and b”, “g
only”, and “b only”. The different modes are explained below.
g and b Mode
In this mode, the Router is compatible with 802.11b and 802.11g wireless clients
simultaneously. This is the factory default mode and ensures successful operation
with all Wi-Fi-compatible devices. If you have a mix of 802.11b and 802.11g
clients in your network, we recommend setting the Router to g and b mode. This
setting should only be changed if you have a specific reason to do so.
g only Mode
g only mode works with 802.11g clients only. This mode is recommended only
if you want to prevent 802.11b clients from accessing your network. To switch
modes, select the desired mode from the “Wireless Mode” drop-down box. Then,
click “Apply Changes”.
b only Mode
We recommend you DO NOT use this mode unless you have a very specific
reason to do so. This mode exists only to solve unique problems that may occur
with some 802.11b client adapters and is NOT necessary for interoperability of
802.11g and 802.11b standards.
When to use b only Mode
In some cases, older 802.11b clients may not be compatible with 802.11g
wireless. These adapters tend to be of inferior design and may use older drivers
or technology. Switching to this mode can solve problems that sometimes occur
with these clients. If you suspect that you are using a client adapter that falls into
this category of adapters, first check with the adapter vendor to see if there is
a driver update. If there is no driver update available, switching to b only mode
may fix your problem.
Please note that switching to b only mode will decrease
802.11g performance.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top